Halogen Free & RoHS Recast Complaint CompactFlash Series 6 Specifications for Industrial CompactFlash Card th January 30 , 2013 Version 1.0 Apacer Technology Inc. th 4 Fl., 75 Hsin Tai Wu Rd., Sec.1, Xizhi, New Taipei City 221, Taiwan Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 www.apacer.com Compact Flash 6 series AP-CFxxxxLAXS-XXXXXX Features: CompactFlash Association Specification Power Management Revision 6.0 Standard Interface Power Smart Design ATA command set compatible Built-in 1.2V Power-On-Reset ATA transfer mode supports: Built-in 2.7V Voltage detector for power PIO Mode 6 fail protection Multiword DMA Mode 4 Ultra DMA Mode 6 Temperature ranges PCMCIA UDMA Mode 5 0C to 70C for operation (Standard) -40C to 85C (extended temperature) Capacities -40C to 100C for storage 8, 16, 32, 64, 128 GB Operating voltage for read and write Performance* 3.3 V Sustained read: Up to 110 MB/sec 5.0 V Sustained write: Up to 60 MB/sec Power consumption (typical)* Intelligent ATA/IDE module Active mode: 265 mA/5.0V Wear-leveling algorithms to substantially Standby mode: 1 mA/5.0V increase longevity of flash media Built-in BCH ECC capable of correcting Connector Type up to 72 bits in 1KB data 50 pins female Supports S.M.A.R.T commands Physical Dimensions NAND Flash Type: MLC 36.4mm x 42.8mm x 3.3mm RoHS Recast Compliant Complies with 2011/65/EU Halogen Free *Performance and power consumption may vary depending on capacities, flash configuration or host system settings. 1 2013 Apacer Technology Inc. Rev. 1.0