4700-4800 series Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES Momentary or alternate Butt action contacts UL, CSA and VDE (EN 61058-1) approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (A) : 3 A 250 VAC - 6 A 125 VAC - copper contacts (C) : 2 A 250 VAC - 4 A 125 VAC Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and frame Electrical life : 10,000 cycles at full load GENERAL SPECIFICATIONS Torque : 0.95 Nm (.70 Ft.lb) max. applied to nut Panel thickness : 5 mm (.196) max. between 2 nuts Total travel : 4.5 mm (.177) +/- 0,5 (.019) Operating temperature : -20 C to +65 C (-4 F to +149 F) Hand soldering : 270 C (518 F) max. for 10 seconds max. - Iron 3 mm (.118) MATERIALS Case : melamine-phenolic Plunger : polyamide Bushing : polyamide Contacts : A : silver C : copper, silver plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-4700-4800-1808 PANEL SWITCHESPANEL SWITCHES4700-4800 series Momentary or alternate action pushbutton switches MOUNTING TERMINALS Panel cut-out : 12.2 mm (.480) 1.20 1.40 (.047) (.055DIA) 4.70 (.185) 2.80x0.50 (.11x.019) AGENCY APPROVALS Solder lug Quick-connect Models 4731A, 4736A, 4741A, 4746A are UL, CSA and VDE (EN 61058-1) approved. 1.20x0.5 Models 4831A, 4836A, 4841A, 4846A are VDE (EN 61058-1) (.047x.019) approved. Marking : to order switches marked UL/CSA, complete Straight PC terminals appropriate box of ordering format. VDE is standard marked. ELECTRICAL FUNCTIONS KEYWAY 322 1 1 Function 6 (ON-ON) Functions 1 and 3 Button returns in upper position after actuation 2 PANEL SWITCHES 7.20 5.00 (.283) (.196) 6.20 (.244) 2.40 (.094) 8.20 (.322) 3.00 (.118)