8000 series Ruggedized switch joysticks The 8000 Series is a family of rugged switch joysticks. Based on the proven mechanics of the 9000 Series, the 8000 Series utilizes high quality microswitches to provide a range of possible outputs, including the option of progressive switching on a single axis for dual speed control. KEY FEATURES One or two axes Up to 1AMP operation Optional center detect Gold plated contacts microswitch Single step or progressive Wide range of handle switching options www.apem.com8000 series Ruggedized switch joysticks OPTION SELECTION SERIES LIMITER BEZEL SWITCHING MODIFIER 8 8000 A Single Axis 0 Not Supplied A Single Axis, Single Pole 00 None C Cross 4 Circular R.M B Single Axis, Double Pole 20 Guided Feel (See note 2) D Diamond 6 Square D.I C Single Axis, Progressive with Detents R Round 7 Circular D.I D Single Axis, Progressive S Square 1. Rear Mounting E Two Axes, Single Pole 2. Drop In Mounting F Two Axes, Double Pole HANDLE CENTER DETECT BOOT AXES C Round 1 Fitted ( See note1) 5 Standard A One D Cylindrical 2 Not fitted B Two E Conical K Push Button Tactile Q Skirted X Two Push Button Tactile AK One Pushbutton AM Tall One Pushbutton AT Conical Low Profile BB Three Button NOTES: 1. The additional center detect switch is not available on joysticks with progressive switching. 2. Guided feel is only available on two axes joysticks. Further non-standard options including custom handles, special limiters and detents are available. Please refer to the factory. 3. Only a square limiter will allow sufficient travel in a diagonal direction to activate both speed and steer switches. BEZEL OPTIONS For drop in mounting, please specify bezel option 6 or 7. For sub-panel mounting, no bezel is necessary, unless the boot is required to seal to the front face of the panel in which case option 4 should be specified. Bezels 6 & 7 clamp the boot and top face of the joystick body to the panel when bezel 4 clamp only the boot. SPRINGING As standard 8000 Series are offered sprung to center. The standard spring force requires1.3N (nominally) to off-center the joystick. The 8000 Series may be specified with a lighter spring (1N), or a stronger spring (1.6N) Note: Forces quoted are subject to exact joystick configuration and are provided as a guide only. SPECIFICATIONS Mechanical Life Cycles : > 1 Million Mechanical Operation s Maximum Voltage : 125 VAC Current Rating : To 1A Switch Contacts : Gold Plated Weight : 90 grams (0.20lbs) Above Panel Seal : IP65 Operating Deflection : +/-- 1 8 Body Material : Glass Reinforced ABS Shaft Diameter : 5 mm (0.20in) Gimbal Pivot : Acetal & Hardened Steel Shaft Material : Stainless Steel Other Materials : Brass, Acetal, Nylon Boot : Neoprene Temperature Range : -25C to 80C (-13F to 76F) 1. Life and reliability of the switches is heavily determined by the type of application and parameters such as load. The Technical Support team will provide further advice about the expected switch performance under differing loads or DC supplies. Note: The company reserves the right to change specifications without notice. www.apem.com