IQ series Sealed pushbutton switches - bushing 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons feature snap-in mounting for easier and faster installation. Momentary and latching versions are available. Main features Snap-in mounting for easy installation Tactile feedback Sealed to IP54 Illuminated or non-illuminated Square or round actuator B1 Wide choice of actuator and illumination colours Flat round actuator for optional marking Momentary versions Electrical function : NO Five terminal options, including screw terminals Silver contacts for screw terminal types Gold plated silver contacts for other types Solder lug terminals Flying lead terminals Screw terminals Latching versions Electrical function : OFF-ON Four terminal options Gold plated silver contacts Solder lug terminals Flying lead terminals The company reserves the right to change specifications without notice. APEM www.apem.com B1-35IQ series Sealed pushbutton switches - bushing 16 mm - snap-in mounting - momentary Distinctive features and specifications UG1410-A-R1 Snap-in mounting for easy installation Momentary models Illuminated or non-illuminated Flat round actuator for optional marking Sealed to IP54 B1 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS Front panel sealing : IP54 according to IEC 60529 Panel thickness : Shock resistance : 100 g according to IEC 512-4, test 6c with flat seal : 2,20 mm (.088) max. Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d without flat seal : 3 mm (.118) max. Salt spray : IEC 512-6, test 11f Total travel : 1,6 mm (.062) +/- 0,3 mm Operating temperature : -40C to +85C Typical operating force : 4N +/- 2N Low level or mechanical life : 1.000.000 cycles ELECTRICAL SPECIFICATIONS Soldering : 320C max. for 3 sec. Max. current/voltage rating with resistive load : - Gold plated contacts : Code 4 : 200mA 48VDC, 500.000 cycles MATERIALS Code 7 : 5A 28VDC, 70.000 cycles Case : thermoplastic UL94-V0 - Silver contacts (code 2) - screw terminals : 4A 48VDC, 500.000 cycles Actuator : polyamide 6/6 Initial contact resistance : 100 m max. Bushing/bezel : polyamide 6/6 Insulation resistance : 1 G min. at 500VDC Contacts : Dielectric strength : 1.500 Vrm 4 and 7 : silver, gold plated LED COMPONENT SPECIFICATIONS 2 : silver (screw terminals) Multi-wire lead AWG20, LED colour Forward current Typ. forward voltage Max. forward voltage 2 section 0,6 mm Super red (L0S) 20mA 2,1V 2,3V LED wire : AWG26, Yellow (L0Y) 20mA 2,1V 2,3V 2 section 0,12 mm Green (L0G) 20mA 2,1V 2,3V Lens : polycarbonate Terminal seal : epoxy Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V Red/green (SG) 20mA Red:1,95V-Green:2,1V 2,5V A resistor must be series-connected by the user. supply voltage - LED forward voltage Resistor value = LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. MOUNTING Panel cut-out Flat seal Back of panel space requirement Matrix mounting 24.00 (.944) 1 1 15.25 0/+0.05 (.600 0/.002) Chamfer of 0.3 to 45 or .011R) 15.25 0/+0.05 (.600 0/.002) 15.90 0/+0.05 (.626DIA 0/+.002) 15.90 0/+0.05 (.626DIA 0/+.002) CIQ3PE B1-36 www.apem.com APEM CIQ3PE ECHELLE 0.90 LE 22/11/2011 1.50min. - 3.00Max. (.059min. - .118MAX.) 1.00min. - 2.20Max. (.039min. - .086MAX.) 16.90 (.665) 16.90 (.665) 24.00 (.944)