Q SERIES 22mm (.866") Panel Mount LED Indicators
Distinctive features and specification
Q22_VOY1609R3US
Features
22mm panel mounting LED indicator
18mm colored diffused epoxy lens or 18mm super bright LEDs
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
Chamfer bezel option in 316L stainless steel and anodized aluminum finish only
Prominent, Recess and flush bezel styles
Custom engraving & secret until lit options available
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
NB: UL Recognized Component
Max Reverse Voltage: 5V
TECHNICAL SPECIFICATIONS
Viewing Angle: 30100 (dependant on model)
Life Expectancy: 100,000 hours
Voltage Operating Voltage Operating Current
(operating & storage)
(Min to Max) (Typical All Types) Temperature Range: 40 to +85C
Torque: 100cNm
22.00 +0.15/-0.0
05 (No Resistor) 3.3 to 9.9VDC 40mA max* 27,00 1,063 AF 3,25 0,128
12VDC 10.8 to 13.2VDC 40mA
24VDC 21.6 to 26.4VDC 40mA
28VDC 25.2 to 30.8VDC 40mA
110VAC 99 to 121VAC 5mA
220VAC 207 to 253VAC 3mA
PANEL CUTOUT
M22 x 1,0 THREAD
Standard LED Intensity Prominent and Recessed Flush Forward Voltage
HE Red 82mcd 70mcd 5.7V
Green 95mcd 66mcd 6.0V
Yellow 60mcd 59mcd 5.9V
Blue 120mcd 101mcd 9.9V
White 1,000mcd 150mcd 3.3V
Bi-color (Typical) (Red/Green)
80/50mcd 80/50mcd 2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow) 80/50/50mcd 80/50/50mcd 2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super bright LED (Diffused) Prominent and Recessed Flush Forward Voltage
HE Red 465mcd 800mcd 5.7V
Green 245mcd 980mcd 9.0V
Yellow 365mcd 1,250mcd 6.0V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
1
www.apem.com
APEMQ SERIES 22mm (.866") Panel Mount LED Indicators
Technical Drawings
SOLDER LUG/FASTONS
PROMINENT BEZEL
REAR EPOXY PINS
M22x1,0
M22x1,0
6,50 0,256 19,00 0,748
6,50 0,256 10,00 0,394
14,25 0,561 8,65 0,341 14,25 0,561 16,00 0,630
35,00 1,378 18,00 0,709
REAR EPOXY WIRES
SHORT BODY PINS
M22x1,0
M22x1,0
6,50 0,256 200,0+/-10
[7,874+/-0,393] 6,50 0,256 17,50 0,689
14,25 0,561
14,25 0,561 14,50 0,571
18,00 0,709
19,50 0,768
SHORT BODY WIRES
M22 x 1,0
200,0+/-10
6,50 0,256
[7,874+/-0,393]
14,25 0,561
20,00 0,787
SOLDER LUG/FASTONS REAR EPOXY PINS
FLUSH BEZEL
M22x1,0
M22x1,0
2,8x0,8[0,11x0,031]
2,50 0,098 19,00 0,748
2,50 0,098 10,00 0,394
11,75 0,463 9,35 0,368 4,75 0,187 16,00 0,630
39,00 1,535 22,00 0,866
SHORT BODY PINS
REAR EPOXY WIRES
M22x1,0 M22x1,0
2,50 0,098 200,0+/-10 2,50 0,098 17,50 0,689
[7,874+/-0,393]
11,75 0,463 11,75 0,463 14,50 0,571
22,00 0,866 23,50 0,925
SHORT BODY WIRES
M22x1,0
2,50 0,098 200,0+/-10
[7,874+/-0,393]
11,75 0,463
24,00 0,945
2
www.apem.com
APEM
25,00
25,00
0,984
0,984 25,00
25,00
0,984
0,984
25,00
25,00
25,00 25,00
25,00
0,984
0,984
0,984 0,984
0,984 25,00
0,984
0,70 0,028
0,70 ,028
0,70 0,028
1,25 0,049
0,70 ,028 1,25 0,049
1,25 0,049
1,25 0,049 1,25 0,049
1,25 0,049
1,25 0,049
1,25 0,049