TG39W000000 Apem

TG series Subminiature slide switches DISTINCTIVE FEATURES Single piece case Epoxy sealed terminals Washable version available Wide variety of contact materials Same PCB layout as TL, TP and TR subminiature series ELECTRICAL SPECIFICATIONS Current/voltage rating with resistive load : - Gold plated contacts : 0.4 VA 20V max. AC or DC - Silver plated contacts : 0.5 A 48V max. AC or DC Contact resistance : 20 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 1,000 Vrms 50 Hz min. between terminals and frame 500 Vrms 50 Hz min. between terminals Electrical life at full load : 2 position switches : 60,000 cycles 3 position switches : 30,000 cycles GENERAL SPECIFICATIONS Travel : 2.60 mm (.102) Wave soldering : 260 C (500 F) - 5 sec. max. Operating temperature : -30 C to +85 C (-22 F to +185 F) Cleaning : solvents or water + detergent MATERIALS Case : flame retardant thermoplastic Actuator : thermoplastic Ground plate and bracket : brass, tin plated Contacts and terminals : see next page Rubber seal : silicone, transparent Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-TG-1803 PANEL SWITCHESPCB SWITCHESTG series Subminiature slide switches PCB MOUNTING Y0 P0 W0 Y0 P0 W0 ELECTRICAL FUNCTIONS 2 PCB SWITCHES 12.60 (.496) 9.60 (.377) 12.60 (.496) 9.10 (.358) 5.55 (.218) 3.05 (.120)