MCX 50 Ohm
Straight Jack Receptacle INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
DIMENSION GOLD PLATED NICKEL PLATED
.068 (1.73) 133-3701-221 133-3701-226
Mounting Hole Layout
Emerson Network Power Connectivity Solutions
299 Johnson Avenue SW, Waseca, MN 56093 800 -247- 8256 +1 (507) 833-8822 www.EmersonConnectivity.comMCX - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
Impedance: 50 Ohms and 7 MHz)
Frequency Range: Connectors .............................................. 0-6 GHz Connectors for RG178 ............................................................... 500
Dummy loads .......................................... 0-1 GHz Connectors for RG316 and adapters ......................................... 700
VSWR: (f = GHz) Straight Cabled Right Angle .086 semi-rigid ............................................................................ 670
Connectors Cabled Connectors Uncabled receptacles ................................................................. 600
RG-178 cable ................................... 1.17 + .04f 1.07 + .06f Dummy loads ............................................................................. N/A
RG-316 and .086 semi-rigid cable ... 1.13 + .04f 1.07 + .04f Power Rating (Dummy Load): 0.5 watt @ +25C, derated to 0.25 watt
Adapters .............................................................................. 1.13 + .04f @ +125C
Uncabled receptacles, Dummy loads ............................................ N/A MECHANICAL RATINGS
Working Voltage: (Vrms maximum) Engagement Design: Compatible with CECC 22220, Series MCX
Connectors for Cable Type Sea Level 70K Feet Engagement Force: 5.6 pounds maximum axial force
RG-178 ................................................... 250 65 Disengagement Force: 8 pounds maximum axial force, 1 pound min.
RG-316, .086 semi-rigid uncabled Contact Retention: 2.3 pounds min. axial force (captivated contacts)
uncabled receptacles, adapters ............ 335 85 1 inch-ounce min. torque (uncabled receptacles)
Dummy loads ............................................................................. N/A Cable Retention: Axial Force* Torque
Dielectric Withstanding Voltage: (VRMS minimum at sea level) (pounds) (in-oz)
Connectors for RG-178 .............................................................. 750 Connectors for RG178 ................................ 10 N/A
Connectors for RG-316, .086 semi-rigid, Connectors for RG316 ................................ 20 N/A
uncabled receptacles, adapters ............................................ 1000 Connectors for RG316DS ........................... 25 N/A
Dummy loads ............................................................................. N/A Connectors for .086 semi-rigid .................... 30 16
Corona Level: (Volts minimum at 70,000 feet) * or cable breaking strength whichever is less.
Connectors for RG-178 .............................................................. 190 ENVIRONMENTAL RATINGS (Meets or exceed the applicable
Connectors for RG-316, .086 semi-rigid paragraph of MIL-C-39012)Durability: 500 cycles minimum
uncabled receptacles, adapters .............................................. 250 Temperature Range:Connectors ............................... - 65C to + 165C
Dummy loads ............................................................................. N/A Dummy loads .......................... - 65C to + 125C
Insertion Loss: (dB maximum, tested at 1 GHz) Thermal Shock: MIL-STD-202, Method 107, Condition F (N/A dummy
Straight cable connectors and adapters ................................. 0.1 dB loads)
Right angle cable connectors ................................................. 0.2 dB Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Uncabled receptacles, dummy loads ......................................... N/A Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Insulation Resistance: 10,000 megohms minimum Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Contact Resistance: (milliohms maximum) After Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
Initial Environmental MATERIAL SPECIFICATIONS
Center contact (straight cabled connectors, Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
uncabled receptacles and adapters) .................5.0 8.0 per MIL-G-45204 .00001 min or nickel plated per QQ-N-290 or
Center contact (right angle cabled connectors) ....5.0 15.0 bright tin plated
Outer contact ........................................................1.0 1.5 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
Braid to body (gold plated connectors) .................1.0 N/A .00003" min.
Braid to body (nickel plated connectors) ...............2.5 N/A Female - beryllium copper per QQ-C-530, gold plated per MIL-G-
RF Leakage: (dB typical tested at 2.5 GHz) 45204 .00003" min.
Cable connectors .................................................................. -55 dB Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Uncabled receptacles and adapters, dummy loads ................... N/A Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Avoid user injury due to misapplication. See safety advisory definitions on page 2.
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR MCX SERIES COMPATIBLE WITH CECC 22220
PLUG
JACK
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with
mating part.
JACK PLUG
Emerson Network Power Connectivity Solutions
299 Johnson Avenue SW, Waseca, MN 56093 800 -247- 8256 +1 (507) 833-8822 www.EmersonConnectivity.com