Rev.10.07.08 2.2 ADN-C Series Page 1 ADN-C Series 120 - 480 Watts Industrial Total Power: 120 - 480 Watts Input Voltage: 85-264 Vac 90-375 Vdc of Outputs: Single Special Features Slim form factor Five year warranty High Efficiency > 90% Typ. Full Power at 60 C Product Descriptions Power Boost Industrial Grade Design The ADN-C series has improved upon the superior reliability of the ADN Series Metal mounting clip of AC-DC power supplies with increased Mean Time Between Failure (MTBF) by Metal case reducing the part count and strategic use of high quality components. In addition MTBF > 450Khr demonstrated at to being extremely reliable by design, the ADN-C has built-in protection from 40 115Vac over temperature, overloads and short circuits. This ensures that reliability is not Active PFC > 0.92 compromised by operation temporarily outside of normal conditions. Intuitive Adjustable output visual diagnostics help ensure easy troubleshooting when such conditions occur OVP protection with autorecovery so that equipment downtime can be minimized. Continuous short circuit and overload protection The ADN-C series features a universal 85-264 Vac input enabling it to be used SEMI F47 Sag Immunity anywhere in the world and is also capable of operating from a 90-375 Vdc 3 Status LEDs input. The power supply produces a tightly regulated 24V output of up to 480W Input / Output / Alarm continuously with convection cooling. The main output can be adjusted over the DCOK Relay range from 22.5V to 28.5V (24V to 28V for ADN20-24-1PM-C) over nominal Parallel operation capability factory set output voltage of 24.5V Screw terminal connections Active power factor correction is employed to minimize input harmonic current RoHS Compliant distortion and ensure compliance with the international EN61000-3-2 standard. No tools required for mounting The power supplies have a full load ambient operating temperature range of -25 to +60 degrees Celsius without de-rating at convection cooling condition. Safety Operation between 60 and 70 degrees Celsius, the output should be derated by UL 508, cULus Listed 5 percent per degree. UL 60950-1, cURus IEC 60950-1 Class I, Div 2 Hazardous Locations IP20 CERev.10.07.08 2.2 ADN-C Series Model Numbers Page 2 Maximum Load Maximum Load Standard Output Voltage Minimum Load Current (I ) Power (P ) O,max O,max ADN5-24-1PM-C 24Vdc 0A 5A 120W ADN10-24-1PM-C 24Vdc 0A 10A 240W ADN20-24-1PM-C 24Vdc 0A 20A 480W Options None