POWER APC18 Data Sheet 60 Watts Total Power: 60 Watts Input Voltages: 3.0 - 5.5 V of Outputs: Single Special feaS Point-of-load (POL) applications) 1 High current slew rate at 2.5 A / S Open frame SMT High efficiency, 3.3 V 95% typical Adjustable output through external Electrical Specifications resistor programming -40 C to +85 C ambient operating Input temperature Input voltage range 3.0 - 5.5 V UVLO protection Efficiency 3.3 V 95% typical Positive Enable function Control Low output ripple and noise Enable TTL compatible (positive enable Regulation to zero load Output Regulation (line, Load, Temp) <3% SY Load current 18 A max UL/cUL 60950 Recognized 1 Ripple and noise 50 mV TV EN60950 Licensed Output adjust range 0.75 V - 3.6 V Current slew rate up to 2.5 A / S 1 Transient response 150 mV typical deviation (3.3 Vo) for 50% to 100% step load 200 S recovery Remote sense 10% of Vo Turn on input voltage 3.0 V (typical) UVLO hysteresis 300 mV (typical) OCP/OTP Hiccup - auto recovery Isolation Non-isolated module afet tureAPC18 Data Sheet Environmental Specifications Operating temperature -40 C to +85 C Storage temperature -40 C to +125 C MTBF 1 million hours Ordering Information Model Number Input Voltage Output Voltage Output Current Efficiency (Typical) APC18T04-9(J)L 3.0 - 5.5 V 0.75 - 3.6 Vdc 18 A 95% Note: 18 A max output current with total output power limited to 60 W - minimal output derating required Typical efficiency for 3.3 V output full load noiminal inut voltage 200 LFM at Ta = 25 C Suffix J designates tray packaging, non J is tape and reel Mechanical Drawings Notes: GND VO TRIM SENSE 1. 200 uF and 2x 150uF input and output capacitance required. PIN SIDE UP VIEW 2. All specifications are typical at nominal line, full load and 25C ambient temperature unless otherwise noted. VIN ENABLE 3. All specifications subject to change without notice. Mechanical drawings are for reference only. 4. Technical Reference Notes should be consulted for detailed information 5. Warranty: One year Recommended PAD Layout PAD Size MIN: 1.6 x 2.8 mm 0.065 x 0.110 inches REC: 1.8 x 2.8 mm 0.070 x 0.110 inches MAX: 2.0 x 3.0 mm 0.080 x 0.130 inches PIN SIDE DOWN VIEW WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 South Diablo Way Ground Floor Offices, Barberry House 2 Wing Yip Street Suite B100 4 Harbour Buildings, Waterfront West Kwun Tong, Kowloon Tempe, AZ 85282, USA Brierley Hill, West Midlands Hong Kong +1 888 412 7832 DY5 1LN, UK www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are For more information: www.artesyn.com trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to For support: productsupport.ep artesyn.com are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. APC18 21Nov2019