Embedded Power for Business-Critical Continuity Rev.10.26.11 105 DA12-M Series 1 of 6 DA12-M Series 12 Watts Total Power: 12 Watts Input Voltage: 90 - 264 Vac of Outputs: Single Interchangeable Plug Special Features 5 V and 12 V versions Electrical Specifications Medical and ITE Safeties Switching wallmount Input power supply Input range: 90 - 264 Vac (wide range) Available in interchangeable & fixed ac plug configurations Frequency: 47 - 63 Hz CE Mark EMC, LVD & ErP 2011 Inrush current: 28 A 264 Vac Universal AC input Fully regulated output Input current: 0.25 A rms 120 Vac 0.15 A 240 Vac Overload and short circu it EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 protection (CISPR 22) Class B Thermal protection Safety ground 100 A 50/60 Hz, 264 Vac input Energy Star and CeC compliant leakage current: Efficiency level V Output Constant voltage High MTBF Voltage (Vo): 5.0 V and 12.0 V Built in EMI filter Voltage regulation: 5% constant voltage mode (CISPR 22 Class B) Maximum Power (Po): 12 W for 12 V models, 10 W for 5 V models Hold-up time: 10 ms. typical at full load 230 Vac Overvoltage protection: Non-latching type Overload protection: Output shortcircuit protection auto recover Overload protected 150% above maximum rating Safety Overtemperature protection: Auto recovery UL 60950, 60601-1 Output cable/connector DC cable with 2.5 mm x 5.5mm barrel plug, 2.1 mm x 5.5 mm cUL 60950, 60601-1 barrel polarity: available on DC multi-plug version. For others please contact factory. TUV 60950-1, 60601-1 DC plug center +v AS/NZS 60950-1, 60601-1 DC plug outer -v CB Certificate and report CE EMC, LVD & ErP 2011 for EU & UK versions PSE Denan (US only)Embedded Power for Business-Critical Continuity Rev.10.26.11 105 DA12-M Series Environmental Specifications 2 of 6 Operating temperature: 0 to +40 C ambient Storage temperature: -40 C to +85 C Electromagnetic Designed to meet EN55024 susceptibility: Humidity: Operating non-condensing 5% to 95% RH 2 Vibration: Frequency/PSD: 5 - 350 Hz 0.0001 g /Hz 350 - 500 Hz - 6dB/Oct. 2 500 Hz 0.00005g /Hz Acceleration: 0.21 gRMS Duration: 20 min per second AC Plug Configuration AC Plug Configuration for Fixed Plug for Interchangeable Plug U.S. 2-prong US U.S. 2-prong DA-US Europe 2-prong EU Europe 2-prong DA-EU United Kingdom 3-prong UK United Kingdom 3-prong DA-UK Australia 2-prong AU Australia 2-prong DA-AU C8 - 2 receptacle DA-C8 Ordering Information - DA12 Adapter Output Ripple 2 Model Number Maximum Power Minimum Load Maximum Load Regulation 3 Voltage P/P (PARD) DA12-120US-M 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-120EU-M 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-120UK-M 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-120AU-M 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-120MP-M* 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-120MP-M2.1** 12 W 12.0 V 0.2 A 1.0 5% 120 mV DA12-050US-M 10 W 5.0 V 0.2 A 2.0 5% 50 mV DA12-050EU-M 10 W 5.0 V 0.2 A 2.0 5% 50 mV DA12-050UK-M 10 W 5.0 V 0.2 A 2.0 5% 50 mV DA12-050AU-M 10 W 5.0 V 0.2 A 2.0 5% 50 mV DA12-050MP-M* 10 W 5.0 V 0.2 A 2.0 5% 50 mV DA12-050MP-M2.1** 10 W 5.0 V 0.2 A 2.0 5% 50 mV * Interchangeable version - AC Plugs must be purchased separately to be used with DA12-120MP-M and DA12-050MP-M ** 2.1 mm x 5.5 mm barrel plug Ordering Information - DA12 Interchangeable Plug Model Number DA-US DA-C8 DA-EU DA-JP DA-UK DA-CH DA-AU DA-KR DA-All Includes DA-US, DA-EU, DA-UK, and DA-AU 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2 . At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 mHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 4 . Power supplies will operate with no-load.