ARTESYN DP10054P3L 100 Watts Advanced Energy s Artesyn new DP10054P3L is a 100 DATA SHEET Watt freestanding external AC-DC power adapter that provides a very flexible Power over Ethernet (POE) compliant Total Power: power solution for a wide variety of portable and desktop 100 Watts applications. The adapter accepts a wide 90-264 Vac input and provides a single, fully regulated 54 Vdc output that Input Voltage: is capable of delivering up to 1.85 A continuously. DP100 90 - 264 Vac series adapters have a typical full load efficiency of 87% and of Outputs: comply with DoE Level VI and EU CoC v5 Tier 2 efficiency Single, 54 Volts requirements. SPECIAL FEATURES SAFETY Active power factor correction UL UL 60950-1 IEC 62368-1 EN6100-3-2 compliant CSA CS A-C22.2 Universal AC input No.60950-1 Fully regulated output CB Certificate and report Overcurrent, overvoltage and thermal PSE Denan PSE approval protection (Japan) Constant voltage CCC Level VI efficiency CE LVD and EMC High MTBF TUV EN60950-1 IEC320 AC receptacle, 3 pin (type C6) Built in EMI filter (CISPR 22 Class B) AC input fuse Efficiency complies with European CoC v.5 Tier 2 & US DoE Level VI RoHS compliant POE isolation on output Meets K.21 enhanced surge requirements of 6KV Criteria B 2021 Advanced Energy Industries, Inc.DP10054P3L ELECTRICAL SPECIFICATIONS Input Input range 90 - 264 Vac (wide range) Frequency 47 - 63 Hz Inrush current 94 A maximum 264 Vac, cold start 25 C Input current 1.85 A maximum Efficiency 87% typical EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class-B Safety ground leakage current 3.5 mA maximum 50/60 Hz, 264 Vac input Output Maximum power (Po) 100 W Hold-up time 20 ms. minimum at full load 115 Vac Overvoltage protection Latching type, recycle AC to reset Overcurrent protection Output short circuit protection auto recover Overload protection 110 - 160% above maximum rating Thermal protection 105 C to 120 C Trip point output will latch off Cable/connector DC cable length 2.5 mm center plug DC plug center +v DC plug outer -v ENVIRONMENTAL SPECIFICATIONS Operating temperature -5 C to +45 C ambient Storage temperature -40 C to +70 C Electromagnetic susceptibility Designed to meet EN61000-4-2, -4, -5, level 3 EN61000-4-3, -6, 3 v/m EN61000-4-8, -11 EN61000-3-2 Class A Humidity Operating non-condensing 10% to 90% RH MTBF demonstrated > 550,000 hours at full load and 25 C ambient conditions 2 advancedenergy.com