POWER DP40 Data Sheet 40 Watts Total Power: 40 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc of Outputs: Single Special FeatureS Medical and ITE safeties Universal AC input Fully regulated output Electrical Specifications Overload and short circuit protection Input Constant voltage Input range: 90 - 264 Vac (wide range) High efficiency 127 - 300 Vdc High MTBF Frequency: 47 - 63 Hz IEC320 AC input receptacle Inrush current: < 50A 230 Vac, cold start 25 C 3 pin (type C14) Class I Input current: < 0.5 A rms 115 Vac < 0.25 A 230 Vac 2 pin (type C8) Class II Built in EMI filter (CISPR 22 Class B) Efficiency: 84% full load typical, 115 Vac LED power good indicator EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B Input power < 49 watts Safety ground leakage current: 300 A 50/60 Hz, 264 Vac input for 3 pin model Complies with EN61000-3-2 100 A 50/60 Hz, 264 Vac input for 2 pin model Meets Energy Star Efficiency Level V Output CE Mark EMC, LVD & ErP 2011 Maximum Power (Po): 40 W Less than 300 mW No-Load power Hold-up time: 10 ms. typical at full load 115 Vac consumption Overvoltage protection: 20% - 45% above nominal output maximum Latching type, recycle AC to reset. SaFety Overload protection: Output short circuit protection auto recover UL 60950-1, 60601-1 Overload protected 110 - 160% above peak rating cUL 60950-1, 60601-1 Cable/connector: 1.2 m DC cable with 2.5 mm I.D, 5.5 mm O.D center plug TUV 60950-1, 60601-1 DC plug center +v CE EMC, LVD & ErP 2011 DC plug outer -v CB Certificate and report CCC China Approval Environmental Specifications Operating temperature: 0 to +40 C ambient. Derate each output as 2.5% per degree from 40 C to 60 C. -20 C start up Storage temperature: -40 C to +85 C Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity: Operating non-condensing 10% to 90% RH Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8Hz to 500Hz, operational MTBF demonstrated: > 550,000 hours at full load and 25 C ambient conditionsDP40 Data Sheet Ordering Information Model Ripple 1 2 Output Voltage Maximum Load Peak Load Regulation 3 Number P/P (PARD) DP4009N2M 9 V 4.44 A 5.4 A 8% 90 mV DP4009N3M 9 V 4.44 A 5.4 A 8% 90 mV DP4012N2M 12 V 3.33 A 4.4 A 5% 120 mV DP4012N3M 12 V 3.33 A 4.4 A 5% 120 mV DP4015N2M 15 V 2.67 A 3.5 A 5% 150 mV DP4015N3M 15 V 2.67 A 3.5 A 5% 150 mV DP4018N2M 18 V 2.22 A 3.0 A 5% 150 mV DP4018N3M 18 V 2.22 A 3.0 A 5% 150 mV 24 V 1.67 A 2.2 A 5% 240 mV DP4024N2M 24 V 1.67 A 2.2 A 5% 240 mV DP4024N3M DP4048N2M 48 V 0.84 A 1.2 A 5% 480 mV DP4048N3M 48 V 0.84 A 1.2 A 5% 480 mV 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Mechanical Drawing Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is 0.02 ( 0.5 mm) 4.88 48 (124.0) (1219 20) 3. Warranty: 2 year 4. Weight: 0.55 lb./.25 kg 5. AC input power cord sold separately. 6. Specifications ar e for convection rating at factory settings at 115 Vac input, 25 C unless otherwise stated 4.88 48 (124.0) (1219 20) WORLDWIDE OFFICES americas europe (uK) asia (HK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street Kwun Tong, Kowloon USA West Midlands, DY5 1LX +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of For support: productsupport.ep artesyn.com this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. DP40-DS 05.29.14 2014 Artesyn Embedded Technologies, Inc. 1.55 2.4 1.55 2.4 (39.5) (61.0) (39.5) (61.0)