Embedded Power for Business-Critical Continuity Rev. 9.23.09 75 DP40 of 2 DP40 40 Watts Total Power: 40 Watts Input Voltage: 90 - 264 VAC 127 - 300 VDC of Outputs: Single Electrical Specifications Input 90 - 264 Vac (wide range) Input range: Special Features 127 - 300 Vdc Frequency: 47 - 63 Hz Medical and ITE safeties Inrush current: < 50A 230 Vac, cold start 25 C Universal AC input Input current: < 0.5 A rms 115 Vac < 0.25 A 230 Vac Fully regulated output Efficiency: 84% full load typical, 115 Vac Overload and short circuit EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B protection 300 A 50/60 Hz, 264 Vac input for 3 pin model Safety ground Constant voltage leakage current: 100 A 50/60 Hz, 264 Vac input for 2 pin model High efficiency Output High MTBF Maximum Power (Po): 40 W IEC320 AC input receptacle 10 ms. typical at full load 115 Vac Hold-up time: 3 pin (t y pe C14) Overvoltage protection: 20% - 45% above nominal output maximum 2 pin (t y pe C8) Latching type, recycle AC to reset. Built in EMI filter Output short circuit protection auto recover Overload protection: (CISPR 22 Class B) Overload protected 110 - 160% above peak rating LED power good indicator Cable/connector: 1.2 m DC cable with 2.5mm I.D, 5.5 mm O.D center plug Input power < 49 watts DC plug center +v Complies with EN61000-3-2 DC plug outer -v Meets Energy Star 2.0 WEEE & CeC IV compliant Environmental Specifications CE Mark EMC & LVD Operating temperature: 0 to +40 C ambient. Derate each output as 2.5% per degree from Less than 300 mW No-Load 40 C to 60 C. -20 C start up power consumption Storage temperature: -40 C to +85 C Electromagnetic Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 susceptibility: Humidity: Operating non-condensing 10% to 90% RH Safety Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8Hz Vibration: UL 60950-1, 60601-1 to 500Hz, operational cUL 60950-1, 60601-1 MTBF demonstrated: > 550,000 hours at full load and 25 C ambient conditions TUV 60950-1, 60601-1 CE EMC & LVD CB Certificate and report CCC China ApprovalEmbedded Power for Business-Critical Continuity Rev. 9.23.09 75 DP40 Americas Ordering Information 2 of 2 5810 Van Allen Way Ripple 1 2 Model Number Output Voltage Maximum Load Peak Load Regulation 3 Carlsbad, CA 92008 P/P (PARD) USA DP4009N2M 9 V 4.44 A 5.4 A 5% 90 mV Telephone: +1 760 930 4600 DP4009N3M 9 V 4.44 A 5.4 A 5% 90 mV Facsimile: +1 760 930 0698 DP4012N2M 12 V 3.33 A 4.4 A 5% 120 mV DP4012N3M 12 V 3.33 A 4.4 A 5% 120 mV Europe (UK) DP4015N2M 15 V 2.67 A 3.5 A 5% 150 mV Waterfront Business Park DP4015N3M 15 V 2.67 A 3.5 A 5% 150 mV Merry Hill, Dudley DP4018N2M 18 V 2.22 A 3.0 A 5% 150 mV West Midlands, DY5 1LX DP4018N3M 18 V 2.22 A 3.0 A 5% 150 mV United Kingdom DP4024N2M 24 V 1.67 A 2.3 A 5% 240 mV Telephone: +44 (0) 1384 842 211 DP4024N3M 24 V 1.67 A 2.3 A 5% 240 mV Facsimile: +44 (0) 1384 843 355 DP4048N2M 48 V 0.84 A 1.2 A 5% 480 mV DP4048N3M 48 V 0.84 A 1.2 A 5% 480 mV Asia (HK) 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 14/F, Lu Plaza 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 2 Wing Yip Street 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line Kwun Tong, Kowloon voltage and load ranges. Hong Kong Mechanical Drawing Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower 4.88 48 (124.0) (1219 20) emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing 4.88 48 (124.0) (1219 20) Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Notes: EmersonNetworkPower.com 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is 0.02 ( 0.5 mm) Emerson Network Power and the Emerson 3. Warranty: 2 year Network Power logo are trademarks and service marks of Emerson Electric Co. 4. Weight: 0.55 lb./ .25 kg 2009 Emerson Electric Co. 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 C unless otherwise stated 1.55 2.4 2.4 (39.5) 1.55 (61.0) (39.5) (61.0)