POWER DPS50-M 60 Watts Data Sheet Medical Total Power: 30 - 60 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc of Outputs: Single Special FeaS Medical safety approvals CE Mark EMC & LVD (except DPS52-M) Universal AC input Fully regulated output Electrical Specifications Overload and short circuit protection Input Internal remote sense to the output Input range 90 - 264 Vac (wide range) plug 127 - 300 Vdc Constant voltage Frequency 47 - 440 Hz Level V efficiency (except DPS52-M) Inrush current <60 A 230 Vac, cold start 25 C High MTBF Input current <2.0 A rms 115 Vac <1 A 230 Vac IEC320 AC receptacle, 3 pin (type C14) Efficiency 88% typical Built-in EMI filter (CISPR 22 Class B) LED power good indicator EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B Input power <74 watts Safety ground leakage current 275 A max. 50/60 Hz, 264 Vac input Complies with EN61000-3-2 Output Meets Energy Star Maximum Power (Po) 60 W (DPS52, 30 W) Hold-up time 10 ms typical at full load 115 Vac SaF Overvoltage protection 20% - 45% above nominal output maximum UL UL 60601-1 Latching type, recycle AC to reset. CSA CSA-C22.2 no.601.1-M90 Overload protection Output short circuit protection auto recover VDE 07501/EN60601-1 (IEC601) Overload protected 120 - 150% above maximum rating CE EMC & LVD (except DPS52-M) Cable/connector DC cable with 2.5 mm center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: 0 C to +40 C ambient. -20 C start up Storage temperature: -40 C to +85 C Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, level 3 Humidity: Operating non-condensing 10% to 90% RH Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to 500 Hz, operational MTBF demonstrated: > 550,000 hours at full load and 25 C ambient conditions ety tureDPS50-M Data Sheet Ordering Information Model Maximum Output Maximum Ripple 1 2 Peak Load Regulation 3 Number Power Voltage Load P/P (PARD) DPS52-M* 30 W 5 V 6 A 6.5 A 2% 50 mV DPS53-M 60 W 12 V 5 A 5.4 A 2% 120 mV DPS54-M 60 W 15 V 4 A 4.3 A 2% 150 mV DPS55-M 60 W 24 V 2.5 A 2.7 A 2% 240 mV DPS58-M 60 W 48 V 1.25 A 1.35 A 2% 480 mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. * No CE approval under new EUP directive Mechanical Drawing INDICATOR LE D 5.24 (133.0) DC OUTPUT CABLE AC INLET 78.7 (200015) MODEL LABEL Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is 0.02 (0.5 mm) 3. Warranty: 2 year 4. Weight: 1.06 lb./.48 kg 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 C unless otherwise stated WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 14/F, Lu Plaza 2900 South Diablo Way Ground Floor Offices, Barberry House Suite B100 4 Harbour Buildings, Waterfront West 2 Wing Yip Street Kwun Tong, Kowloon Tempe, AZ 85282, USA Brierley Hill, West Midlands +1 888 412 7832 DY5 1LN, UK Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are For more information: www.artesyn.com trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are For support: productsupport.ep artesyn.com trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. DPS50-M-DS 05Dec2019 1.62 2.39 (41.0) (60.7)