PTH03060 3.3 Vin single output DC-DC CONVERTERS POLA Non-isolated 1 NEW Product 10 A output current 3.3 V input voltage Wide-output voltage adjust (0.8 Vdc to 2.5 Vdc) Auto-track sequencing* Margin up/down controls Pre-bias start-up capability Efficiencies up to 93% Output ON/OFF inhibit Output voltage sense Point-of-Load-Alliance (POLA) compatible Available RoHS compliant The PTH03060 is a next generation series of non-isolated dc-dc converters offering some of the most advanced POL features available in the industry. The primary new feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSPs, FPGAs and ASICs requiring controlled power-up and power down. Other industry leading features include margin up/down controls, pre-bias start-up capability and efficiencies up to 93%. The PTH03060 has an input voltage of 2.95 Vdc to 3.65 Vdc and offers a wide 0.8 Vdc to 2.5 Vdc output voltage range with up to 10 A output current, which allows for maximum design flexibility and a pathway for future upgrades. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 C unless otherwise stated SPECIFICATIONS C = 330 F, C = 0 F in out OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability (See Note 4) 0.8-2.5 Vdc Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Setpoint accuracy 2.0% Vo Radiated immunity EN61000-4-3 Line regulation 10 mV typ. GENERAL SPECIFICATIONS Load regulation 12 mV typ. Efficiency (See Efficiency Table) 93% max. Total regulation 3.0% Vo Insulation voltage Non-isolated Minimum load 0 A Switching frequency 300 kHz typ. 25 kHz Ripple and noise 20 MHz bandwidth 20 mV pk-pk Approvals and EN60950 Temperature co-efficient -40 C to +85 C 0.5% Vo standards UL/cUL60950 Transient response 70 s recovery time Material flammability UL94V-0 (See Note 5) Overshoot/undershoot 100 mV Dimensions (L x W x H) 25.27 x 15.75 x 9.00 mm Margin adjustment 5.0% Vo 0.995 x 0.620 x 0.354 in Weight 3.7 g (0.13 oz) INPUT SPECIFICATIONS MTBF Telcordia SR-332 7,092,000 hours Input voltage range (See Note 3) 2.95-3.65 Vdc Input current No load 10 mA typ. ENVIRONMENTAL SPECIFICATIONS Remote ON/OFF (See Note 1) Positive logic Thermal performance Operating ambient, -40 C to +85 C (See Note 2) temperature Start-up time 1 V/ms Non-operating -40 C to +125 C Undervoltage lockout 2.8-2.95 Vdc typ. MSL (Z suffix only) JEDEC J-STD-020C Level 3 Track input voltage Pin 8 (See Note 6, 7) 0.3 Vin PROTECTION International Safety Standard Approvals Short-circuit Auto reset 20 A typ. UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 *Auto-track is a trade mark of Texas Instruments TV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL File Name: pth03060.pdf Rev: 28 Jun 2006PTH03060 3.3 Vin single output DC-DC CONVERTERS POLA Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT (9,10) VOLTAGE VOLTAGE (MAX.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 25 W 2.95-3.65 Vdc 0.8-2.5 Vdc 0 A 10 A 93% 10 mV 12 mV PTH03060 Part Number System with Options PTH03060W AST Product Family Packaging Options Point of Load Alliance No Suffix = Trays (8) Compatible T = Tape and Reel (9) Input Voltage Mounting Option 03 = 3.3 V D = Horizontal Through-Hole (Matte Sn) H = Horizontal Through-Hole (Sn/Pb) S = Surface-Mount (63/37 Sn/Pb pin solder material) Output Current Z = Surface-Mount (95.5/3.8/0.7 Sn/Ag/Cu 06 = 10 A pin solder material) Mechanical Package Pin Option Always 0 A = Through-Hole Std. Pin Length (0.140) A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code W = Wide OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee PPTTHH0033006600 SSeerriieess The ultra-wide output voltage trim range offers major advantages to users who select the PTH03060. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 2.5 Vdc. When the PTH03060 converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. NNootteess EFFICIENCY TABLE (I = 7 A) O 1 Remote ON/OFF. Positive Logic OUTPUT VOLTAGE EFFICIENCY ON: Pin 3 open or V > Vin - 0.5 V OFF: Pin 3 GND or V < 0.8 V (min - 0.2 V). Vo = 1.0 V 85% 2 See Figure 1 for safe operating curve. 3 A 330 F electrolytic input capacitor is required for proper operation. The Vo = 1.2 V 87% capacitor must be rated for a minimum of 700 mA rms of ripple current. 4 An external output capacitor is not required for basic operation. Adding Vo = 1.5 V 89% 330 F of distributed capacitance at the load will improve the transient response. Vo = 1.8 V 91% 5 1 A/s load step, 50 to 100% I , C = 330 F. omax out 6 If utilized Vout will track applied voltage by 0.3 V (up to Vo set point). Vo = 2.0 V 92% 7 The pre-bias start-up feature is not compatible with Auto-Track . This is because when the module is under Auto-Track control, it is fully active Vo = 2.5 V 93% and will sink current if the output voltage is below that of a back-feeding source. Therefore to ensure a pre-bias hold-off, one of the following two techniques must be followed when input power is first applied to the module. The Auto-Track function must either be disabled, or the modules output held off using the Inhibit pin. Refer to Application Note 154 for more details. 8 Tape and reel packaging only available on the surface-mount versions. 9 To order Pb-free (RoHS compatible) surface-mount parts replace the mounting option S with Z, e.g. PTH03060WAZ. To order Pb-free (RoHS compatible) through-hole parts replace the mounting option H with D, e.g. PTH03060WAD. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at