Solid State Timers and Controllers 0.1 Seconds to DIP Switch Adjustable On-Off Cycling Timer 1024 Hours 2600SA The 2600SA is an ON/OFF timer controlling a set of DPDT relay contacts. The timer is available in both AC and DC voltages, and all models contain two 12 position DIP switches for setting the time delays. The timer turns the output contacts ON upon application of the operating voltage, and will cycle the contacts ON and OFF on a continuous basis until the voltage is removed. The integral LED indicates the state of the output contacts. The ON and OFF times can be changed while power is applied, the appropriate switch is read prior to the beginning of each ON and OFF cycle Timing Diagram ON Operating Voltage 1.8 MAX Output Contacts ON OFF TIME TIME 2.4 MAX Setting the ON & OFF Times Time Delay Relay MODE : ON-OFF CYCLE MODEL : 2600SA-8 INPUT : 120VAC, 50/60Hz RANGE : 0.1 SEC - 1024 HRS Setting the time delay is an easy two step process : Selecting the Time Range - Open or Close switches 11 & 12 per the chart 7 6 below to select from the four time ranges: 0.1 - 102.4 seconds, 1 - 1024 5 8 Input seconds, 1 - 1024 minutes, and 1 - 1024 hours. Voltage 3.6 MAX 4 1 Setting the Time Delay - The timer has a built-in delay equal to the switch 1 value for the selected range (0.1 sec, 1 sec, etc.). Close the additional 3 2 switches (1 - 10) which add their values from the chart below to the built- in time to achieve the desired time delay. Artisan Controls Corporation Timing Period vs Timing Resistance Range Parsippany, NJ Made in USA www.artisancontrols.com Example: To set for 30 minutes - switches 11 closed and 12 open for minutes range, then close switches 5, 4, 3, and 1 for a total of 29 minutes, 0.6 MAX all other switches open. The built in 1 minute completes the full 30 minutes. DIP Switch Chart . 123 4567 89 10 11 12 Time Delay Range 0.1 0.2 0.4 0.8 1.6 3.2 6.4 12.8 25.6 51.2 off off 0.1 - 102.4 Seconds 1 2 4 8 16 32 64 128 256 512 off ON 1 - 1024 Seconds 1 2 4 8 16 32 64 128 256 512 ON off 1 - 1024 Minutes 1 2 4 8 16 32 64 128 256 512 ON ON 1 - 1024 Hours V I S I T O U R W E B S I T E A T : www.artisancontrols.com Notice: Artisan Controls Corporation assumes no responsibilty for customer s applications or product design. The information and data contained herein is the sole and exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written consent of Artisan Controls Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party misusing this property. Tel: 973-598-9400 Fax: 973-598-9410 Toll Free: 800-457-4950 Artisan Controls Corporation, 111 Canfield Ave. Bldg B15-18, Randolph, New Jersey 07869, USA ON OFFSolid State Timers and Controllers Specifications Timing Mode: Microprocessor-based On / Off Cycling. Operating Voltage: Non-polar connection, see values below, 50/60 Hz for AC voltages. Operating Power: Idle operating current < 10mA for all voltages. Nominal operating current with relay output energized is 60mA 12VDC (-2), 30mA 24V AC/DC (-3), 15mA 115VAC (-8). Operating Voltage Tolerance: -10%/+20% Operating Temperature: -20C to +65C. Purchase Tolerance: 2% or 20mS whichever is greater. Timing Repeatability: Better than 2%. Time/Temperature Coefficient: Better than 0.1%/C. Recycle Time: 75mSec minimum with relay on, 150mSec minimum with relay off. Output Relay Ratings: DPDT contacts rated 12A resistive at 125VAC, 7A resistive at 250VAC/ 30VDC. Contact Life Expectancy: 30,000 cycles 12A/120VAC, 100,000 cycles 10A/120VAC or 7A/ 240AC, 900 cycles/hour maximum w/resistive load. Terminations: Octal plug-in type. Dielectric Rating: 750 Vrms between open contact sets, 1500 Vrms between contacts and operating voltage terminals. Transient Protection: Protected by silicon transient suppressors responding to transients within -12 1x10 seconds to a peak pulse power dissipation of 1500W. Agency Recognition: Certified to UL Component-Appliance Controls ATNZ2 (US) and ATNZ8 (Can), UL File E47858. Document and Revision Date: April 14, 2009 Ordering Information Model Number Operating Voltage -2 (12V DC) 48V and 230V units are available on special order 2600SA -3 (24V AC/DC) -8 (115V AC) Typical Wiring Example LINE 1 LINE 2 LOAD 4 5 3 6 2 7 No Polarity on power inputs 2 & 7 1 8 V I S I T O U R W E B S I T E A T : www.artisancontrols.com Notice: Artisan Controls Corporation assumes no responsibilty for customer s applications or product design. The information and data contained herein is the sole and exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written consent of Artisan Controls Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party misusing this property. Tel: 973-598-9400 Fax: 973-598-9410 Toll Free: 800-457-4950 Artisan Controls Corporation, 111 Canfield Ave. Bldg B15-18, Randolph, New Jersey 07869, USA