Features This series is currently available but Low noise termination for CMOS not recommended for new designs. Combined resistors and capacitors in SIP package saves space Reduced insertion time Insulation resistance testing for reliability For information on RC Terminators, Pin counts from 4 to 16 available download Bourns RC Terminator Networks Application Note. RoHS compliant* 700 Series - RC Terminator Networks Electrical Characteristics - Resistors Product Dimensions Standard Resistance Range, 5 % Tolerance ............................. 22 ohms to 470K ohms 8.5 A (.335) Operating Voltage ................................................................................ 50 volts maximum MAXIMUM MAX. Electrical Characteristics - Capacitors Capacitance Range ...........................................................................39 pF to 47,000 pF PIN 1 Capacitance Range .................................................................470 pF to 47,000 pF X7R REF. Capacitance Range ........................................................................ 39 pF to 470 pF NPO MAX. 1.24 3.0 ~ 3.8 Capacitance Tolerance ........................................................................................... 20 % BOTH ENDS (.049) (.118 ~ 0.15) Operating Temperature ........................................................................... -30 C to +85 C .508 .050 TYP. Voltage Rating ......................................................................................................50 volts (.020 .002) 2.54 .07 Physical Characteristics (.100 .003** ) TYP. NON-ACCUM. Flammability ...................................................................................Conforms to UL94V-0 Pin A Maximum Count mm (Inches) Lead Frame Material ..................................................................... Copper, solder coated 4 10.11 (.398) Body Material............................................................................................Conformal coat 3.81 5 12.65 (.498) MAX. 6 15.19 (.598) (.150) 7 17.73 (.698) 8 20.27 (.798) 9 22.81 (.898) 10 25.35 (.998) 701 11 27.89 (1.098) 12 30.43 (1.198) .254 .050 13 32.97 (1.298) TYP. 14 35.51 (1.398) (.010 .002) 15 38.04 (1.498) 16 40.59 (1.598) 1 8 Governing dimensions are metric. Dimensions in parentheses are inches and are approximate. **Terminal centerline to centerline measurements made at point of emergence of the lead from the body. Typical Part Marking 1 9 ELECTRICAL RESISTANCE CONFIGURATION CODE*** 1 = Single Termination 2 = Double Termination NO. OF 7 1 J F BOURNS P/N PACKAGE LINES CAPACITANCE PIN ONE CODE*** INDICATOR 7 4608H-701-RC/CCL High Pro le MODEL 7 = 700 Series 8 4609H-701-RC/CCL Conformal SIP 9 4610H-701-RC/CCL ***See Standard Marking, Values and Codes tables. 702 1 10 NO. OF BOURNS P/N PACKAGE LINES High Pro le 8 4610H-702-RC/CCL Conformal SIP *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Speci cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications. *RoHS COMPLIANTAdditional Features Minimizes space and routing problems, and Prevents bus lines and control signals from reduces manufacturing cost per installed oating to unde ned logic levels. resistive function. Optimizes signal transmission in high performance systems through proper Increases board yields and reliability by termination. reducing component count. Eliminates overshoot and ringing, increases noise immunity, minimizes signal distortion, and lowers EMI/RFI radiation. 700 Series - RC Terminator Networks Standard Resistance Values And Codes Standard Capacitance Values And Codes Resistance Marking Resistance Resistance Marking Resistance Marking Capacitance Marking Capacitance Capacitance Capacitance (Ohms) Code Code (Ohms) Code Code Code Code Code Code 22 A 220 2,700 A3 272 39pF A 390 1000 pF R 102 27 B 270 3,300 A4 332 47 B 470 1200 S 122 33 C 330 3,900 A5 392 56 C 560 1500 T 152 39 D 390 5,600 A6 562 47 E 470 6,800 A7 682 68 D 680 1800 U 182 50 F 500 8,200 A8 822 82 E 820 2200 V 222 56 G 560 10,000 A9 103 100 F 101 2700 W 272 68 H 680 12,000 B1 123 120 G 121 3300 X 332 75 I 750 15,000 B2 153 82 J 820 18,000 B3 183 150 H 151 3900 Y 392 100 K 101 20,000 B4 203 180 I 181 4700 Z 472 120 L 121 22,000 B5 223 220 J 221 5600 A1 562 150 M 151 27,000 B6 273 180 N 181 33,000 B7 333 270 K 271 6800 A2 682 220 O 221 39,000 B8 393 330 L 331 8200 A3 822 270 P 271 47,000 B9 473 390 M 391 .010 F A4 103 330 Q 331 56,000 C1 563 470 N 471 .012 A5 123 390 R 391 68,000 C2 683 470 S 471 82,000 C3 823 560 O 561 .015 A6 153 560 T 561 100,000 C4 104 680 P 681 .018 A7 183 680 U 681 120,000 C5 124 820 Q 821 .022 A8 223 820 V 821 150,000 C6 154 1,000 W 102 180,000 C7 184 .027 A9 273 1,200 X 122 220,000 C8 224 .033 B1 333 1,500 Y 152 270,000 C9 274 .039 B2 393 1,800 Z 182 330,000 D1 334 .047 B3 473 2,000 A1 202 390,000 D2 394 2,200 A2 222 470,000 D3 474 Values not appearing in above tables are available to optimize system performance. Contact Bourns Networks to inquire. How To Order RC Terminator Networks 46 08 H - 701 - RC/CC L Model Terminations (46 = Conformal L = Lead free SIP) (Sn/Ag/Cu-plated) Number of Pins Resistance/ 4 to 16 Capacitance Code First 2 digits are signi cant Physical Third digit Con guration represents the (H = High Pro le) number of zeros to follow Electrical Con guration 701 = Single Termination 702 = Double Termination REV. 12/15 Speci cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications.