6N140A, HCPL-675x, 83024, HCPL-570x,
HCPL-177K, 5962-89810, HCPL-573x,
1
HCPL-673x, 5962-89785, 5962-98002
Hermetically Sealed, Low I , Wide V , High Gain
F CC
Optocouplers
Data Sheet
Description Features
These units are single, dual, and quad channel, hermetically Dual marked with device part number and DLA Standard
sealed optocouplers. The products are capable of operation Microcircuit Drawing (SMD)
and storage over the full military temperature range and can
Manufactured and tested on a MIL-PRF-38534 Certified
be purchased as either commercial product or with full
Line
MIL-PRF-38534 Class Level H or K testing or from the
QML-38534, Class H and K
appropriate DLA Standard Microcircuit Drawing (SMD). All
Five hermetically sealed package configurations
devices are manufactured and tested on a MIL-PRF-38534
Performance guaranteed over full military temperature
certified line, and Class H and K devices are included in the DLA
range: 55C to +125C
Qualified Manufacturers List QML-38534 for Hybrid
Low input current requirement: 0.5 mA
Microcircuits.
High current transfer ratio: 1500% typical at I = 0.5 mA
F
Each channel contains a GaAsP light emitting diode that is
Low output saturation voltage: 0.11V typical
optically coupled to an integrated high gain photon detector.
1500 Vdc withstand test voltage
The high gain output stage features an open collector output,
providing both lower saturation voltage and higher signaling High radiation immunity
speed than possible with conventional photo-Darlington
6N138/9, HCPL-2730/31 function compatibility
optocouplers. The shallow depth and small junctions offered
Reliability data
by the IC process provides better radiation immunity than
conventional photo transistor optocouplers.
Applications
The supply voltage can be operated as low as 2.0V without
adversely affecting the parametric performance. Military and aerospace
High reliability systems
These devices have a 300% minimum CTR at an input current
Microprocessor system interface
of only 0.5 mA making them ideal for use in low input current
applications such as MOS, CMOS, low power logic interfaces or Transportation, medical, and life critical systems
line receivers. Compatibility with high-voltage CMOS logic
Isolated input line receiver
systems is assured by specifying I and I at 18 Volts.
CCH OH
EIA RS-232-C line receiver
Voltage level shifting
Isolated input line receiver
Isolated output line driver
CAUTION It is advised that normal static precautions be Logic ground isolation
taken in handling and assembly of this
Harsh industrial environments
component to prevent damage and/or
Current loop receiver
degradation which may be induced by ESD.
System test equipment isolation
Process control input/output isolation
1. See Selection GuidePackage Styles and Lead Configuration
Options for available extensions.
Broadcom
- 1 -6N140A, HCPL-675x, 83024, HCPL-570x, HCPL-177K, 5962-89810, HCPL-573x, HCPL-673x, Functional Diagram
5962-89785, 5962-98002
Data Sheet
Package styles for these parts are 8-pin and 16-pin DIP through
Functional Diagram
hole (case outlines P and E respectively), 16-pin DIP flat pack
Multiple channel devices available.
(case outline F), and leadless ceramic chip carrier (case outline
2). Devices may be purchased with a variety of lead bend and
plating options. See Selection GuidePackage Styles and Lead
8
1
Configuration Options for details. Standard Military Drawing
(SMD) parts are available for each package and lead style.
2 7
Because the same electrical die (emitters and detectors) are
used for each channel of each device listed in this data sheet,
3 6
absolute maximum ratings, recommended operating
conditions, electrical specifications, and performance
characteristics shown in the figures are similar for all parts
4 5
except as noted. Additionally, the same package assembly
processes and materials are used in all devices. These
similarities justify the use of a common data base for die
Truth Table
related reliability and certain limited radiation test results.
(Positive Logic)
Input Output
On (H) L
Off (L) H
NOTE The connection of a 0.1-F bypass capacitor
between V and GND is recommended.
CC
Selection GuidePackage Styles and Lead Configuration Options
Package 16-pin DIP 8-pin DIP 8-pin DIP 16-pin Flat Pack 20-Pad LCCC
Lead Style Through Hole Through Hole Through Hole Unformed Leads Surface Mount
Channels 4 1 2 4 2
, GND None V , GND V , GND None
Common Channel Wiring V
CC CC CC
Part Number and Options
Commercial 6N140A HCPL-5700 HCPL-5730 HCPL-6750 HCPL-6730
MIL-PRF-38534 Class H 6N140A/883B HCPL-5701 HCPL-5731 HCPL-6751 HCPL-6731
MIL-PRF-38534 Class K HCPL-177K HCPL-570K HCPL-573K HCPL-675K HCPL-673K
a a a a b
Standard Lead Finish
Gold Plate Gold Plate Gold Plate Gold Plate Solder Pads
b
Option #200 Option #200 Option #200
Solder Dipped
a
Option #100 Option #100 Option #100
Butt Cut/Gold Plate
b
Option #300 Option #300 Option #300
Gull Wing/Soldered
a
Option #600 Option #600 Option #600
Crew Cut/Gold Plate
Class H SMD Part Number
Prescript for all below None 5962- 5962- None 5962-
a
8302401EC 8981001PC 8978501PC 8302401FC
Gold Plate
b
8302401EA 8981001PA 8978501PA 89785022A
Solder Dipped
Broadcom
- 2 -