ACNV3130-300E Broadcom

ACNV3130 2.5 Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP10 Package Data Sheet Description Features The ACNV3130 contains an AlGaAs LED, which is optical- 2.5 A maximum peak output current ly coupled to an integrated circuit with a power output 2.0 A minimum peak output current stage. This optocoupler is ideally suited for driving power 500 ns maximum propagation delay IGBTs and MOSFETs used in motor control inverter appli- cations. The high operating voltage range of the output 350 ns maximum propagation delay diff erence stage provides the drive voltages required by gate con- 40 kV/s minimum Common Mode Rejection (CMR) at trolled devices. The voltage and high peak output current V = 1500 V CM supplied by this optocoupler can be used to drive a dis- I = 5.0 mA maximum supply current CC crete power stage make it ideally suited for direct driving Under Voltage Lock-Out Protection (UVLO) with IGBT with ratings up to 1700V/100A. For IGBTs with higher Hysteresis ratings, this optocoupler can be used to drive a discrete power stage which drives the IGBT gate. The ACNV3130 Wide Operating V Range: 15 to 30 V CC has the highest insulation voltage of VIORM= 2262 Vpeak Industrial Temperature Range: -40C to 105C in the IEC/ EN/DIN EN 60747-5-5. Safety Approval Pending Functional Diagram - UL Recognized 7500 V for 1min. RMS - CSA NC 1 10 V CC - IEC/EN/DIN EN 60747-5-5 V = 2262 Vpeak IORM Applications ANODE 2 9 V OUT 690Vac application CATHODE NC 3 8 IGBT/MOSFET gate drive NC AC and Brushless DC motor drives 4 V 7 EE Renewable energy inverters NC NC 5 6 Industrial inverters Switching power supplies Design Note: - NC denotes not connected - A 0.1 F bypass capacitor must be connected between pins V and CC V EE Truth Table - ACNV3130 V V V V CC EE CC EE POSITIVE GOING NEGATIVE GOING LED (i.e., TURN-ON) (i.e., TURN-OFF) V O OFF 0 - 30 V 0 30 V LOW ON 0 11V 0 9.5V LOW ON 11 - 13.5V 9.5 12V TRANSITION ON 13.5 30V 12 30V HIGH CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information ACNV3130 is UL Recognized with 7500 V for 1 minute per UL1577. RMS Option Gull Wing Tape IEC/EN/DIN EN Part number RoHS Compliant Package Surface Mount & Reel 60747-5-5 Quantity ACNV3130 -000E 500mil X 35 per tube DIP-10 -300E X X 35 per tube -500E X X X 500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACNV3130-500E to order product of 500mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACNV3130-000E to order product of 500mil DIP package in Tube packaging and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. 2