ACNW3410-000E Broadcom

Data Sheet ACNW3410 3 Amp Output Current IGBT Gate Drive Optocoupler with 100 kV/s Noise Immunity Description Features The Broadcom ACNW3410 contains an LED, which is 3.0 A maximum peak output current optically coupled to an integrated circuit with a power output Rail-to-rail output voltage stage. This optocoupler is ideally suited for driving IGBTs UVLO with V reference for negative power supply E and power MOSFETs used in motor control inverter 150 ns maximum propagation delay applications. The 100 kV/s noise immunity prevent 90 ns maximum propagation delay difference erroneous drive in noisy industrial environment. The voltage LED current input with hysteresis and high peak output current supplied by this optocoupler 100 kV/s minimum Common Mode Rejection (CMR) at make it ideally suited for driving IGBT directly. The V = 1500V CM ACNW3410 has the highest insulation voltage of I = 5.0 mA maximum supply current CC V = 1414 V in the IEC/ EN/DIN EN 60747-5-5. IORM peak Under Voltage Lock-Out Protection (UVLO) with Hysteresis CAUTION It is advised that normal static precautions be Wide Operating V Range: 15V to 30V taken in handling and assembly of this CC Industrial Temperature Range: 40C to 105C component to prevent damage and/or degradation that may be induced by ESD. Safety Approval UL Recognized 5000 V for 1min. RMS CSA IEC/EN/DIN EN 60747-5-5 V = 1414 V IORM peak Applications IGBT/MOSFET gate drive AC and brushless DC motor drives Renewable energy inverters Industrial inverters Switching power supplies Broadcom pub-005667 April 10, 2020ACNW3410 Data Sheet 3 Amp Output Current IGBT Gate Drive Optocoupler with 100 kV/s Noise Immunity Figure 1: Functional Diagram 1 NC 8 V CC UVLO 2 7 V ANODE OUT CATHODE 3 6 V E NC 4 5 V EE Design Notes: A 1-F bypass capacitor must be connected between pins V and V . CC EE Table 1: Truth Table ACNW3410 V V POSITIVE GOING (that is, TURN-ON) V V NEGATIVE GOING (that is, TURN-OFF) LED VO CC E CC E OFF 0 V to 30 V 0V to 30V LOW ON 0 V to 11.9 V 0V to 10.9V LOW ON 11.9 V - to 13.2 V 10.9V to 12.2V TRANSITION ON 13.2 V to 30 V 12.2V to 30V HIGH Ordering Information ACNW3410 is UL Recognized with 5000 V for 1 minute per UL1577. RMS Table 2: Ordering Information Option RoHS Gull Wing IEC/EN/DIN Part Number Compliant Package Surface Mount Tape and Reel EN 60747-5-5 Quantity ACNW3410 -000E 400mil DIP-8 X 42 per tube -300E X X 42 per tube -500E X X X 750 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACNW3410-500E to order product of 400-mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACNW3410-000E to order product of 400mil DIP package in Tube packaging and RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Broadcom pub-005667 2