ACPL-302J 2.5 Amp Gate Drive Optocoupler with Integrated Flyback Controller for Isolated DC-DC Converter, IGBT DESAT Detection, Active Miller Clamping, FAULT and UVLO Status Feedback Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Avago s ACPL-302J 2.5 Amp Gate Drive Optocoupler Integrated flyback controller for isolated DC-DC features integrated flyback controller for isolated DC-DC converter converter, IGBT desaturation sensing with fault feedback Regulated Output Voltage: 20 V and soft-shutdown, Under-Voltage LockOut (UVLO) with Peak output current: 2.5 A max. feedback and active Miller current clamping. The fast Miller Clamp Sinking Current: 1.7 A max. propagation delay with excellent timing skew perfor- Wide Input Voltage Range: 8 V to 18 V mance enables excellent timing control and efficiency. This full feature optocoupler comes in a compact, surface- Common-Mode Rejection (CMR): > 30 kV/ms at V = CM mountable SO-16 package for space-savings, is suitable 1500 V for driving IGBTs and power MOSFETs used in motor Propagation delay: 250 ns max. control and inverter applications. Integrated fail-safe IGBT protection Desat detection, Soft IGBT turn-off and Fault Functional Diagram Feedback SW VEE2 VCC2 Under Voltage Lock-Out (UVLO) protection with Feedback OSC Logic High Noise Immunity Control S Miller Current Clamping R LED2+ Direct LED input with low input impedance and low VCC1 UVLO noise sensitivity COMP /UVLO Negative Gate Bias VE Input Driver DESAT /FAULT SO-16 package with 8 mm clearance and creepage Over Output Driver Current Regulatory approvals: VEE1 UL 1577, CSA VO IEC/EN/DIN EN 60747-5-5 AN SSD/ SSD Control CLAMP CA Applications Miller Control VEE2 Isolated IGBT/MOSFET Inverter gate drive Figure 1. ACPL-302J Functional Diagram Renewable energy inverters AC and brushless DC motor drives Industrial inverters Uninterruptible Power Supplies (UPS) CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments.9(4) Ordering Information Option IEC/EN/DIN EN Part Number (RoHS Compliant) Package Surface Mount Tape & Reel 60747-5-5 Quantity ACPL-302J -000E SO-16 X X 45 per tube ACPL-302J -500E X X X 850 per reel To order, choose a part number from the Part Number column and combine with the desired option from the Option column to form an order entry. Example: ACPL-302J-500E to order product of SO-16 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval that is RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawing (16-Lead Surface Mount) 1.270 BSC 0.457 typ. (0.050) (0.018) RECOMMENDED LAND PATTERN TYPE NUMBER DATE CODE A +0.254 AVAGO 302J 11.634 7.493 0.127 LEAD-FREE YYWW (0.458) +0.010) (0.295 EEE 0.005) 2.160 (0.085) LOT ID 0.635 +0.254 10.363 (0.025) 0.127 1.270 +0.010) (0.408 (0.050) 0.005) 8.763 0.254 (0.345 0.010) 3.505 0.127 (0.138 0.005) 0.203 0.102 (0.008 0.004) (0 - 8) 0.254 typ. STANDOFF Dimensions in millimeters (inches) (0.010) 0.635 min. (0.025) Note: Lead coplanarity = 0.10 mm (0.004 inches) 10.363 0.254 Floating lead protrusion = 0.25 mm (0.010 inches) Max. (0.408 0.010) Mold Flash on each side = 0.127 mm (0.005 inches) Max. Recommended Lead-free IR Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-halide flux should be used. 2 9(4)