ACPL-W345-500E Broadcom

Data Sheet ACPL-P345 and ACPL-W345 1.0-Amp Output Current Power, GaN, and SiC MOSFET Gate Drive Optocoupler with Rail-to- Rail Output Voltage in Stretched SO6 Description Features 1.0A maximum peak output current The Broadcom ACPL-P345/W345 contains an AlGaAs 0.8A minimum peak output current LED, which is optically coupled to an integrated circuit with Rail-to-rail output voltage a power output stage. This optocoupler is ideally suited for 120 ns maximum propagation delay driving power, GaN(Gallium Nitride), and SiC(Silicon 50 ns maximum propagation delay difference Carbide) MOSFETs used in inverter or AC-DC/DC-DC LED current input with hysteresis converter applications. The high operating voltage range of 100 kV/s minimum Common Mode Rejection (CMR) at the output stage provides the drive voltages required by V = 1500V gate controlled devices. The voltage and high peak output CM I = 4.0 mA maximum supply current current supplied by this optocoupler make it ideally suited CC for direct driving MOSFETs at high frequency for high Under Voltage Lock-Out protection (UVLO) with hysteresis efficiency conversion. The ACPL-P345 and ACPL-W345 have the highest insulation voltage of V = 891 V Wide operating V range: 10V to 20V IORM peak CC and V = 1140 V respectively in the IEC/EN/DIN EN Industrial temperature range: 40C to +105C IORM peak 60747-5-5. Safety approval: UL Recognized 3750/5000 V for 1 min. RMS CSA IEC/EN/DIN EN 60747-5-5 V = 891/1140 V IORM PEAK Applications Power, GaN, and SiC MOSFET gate drive AC and Brushless DC motor drives Switching power supplies CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments. Broadcom AV02-4079EN August 15, 20181.0-Amp Output Current Power, GaN, and SiC MOSFET Gate Drive Optocoupler with Rail- ACPL-P345 and ACPL-W345 Data Sheet to-Rail Output Voltage in Stretched SO6 Functional Diagram Truth Table V V V to V CC EE CC EE ANODE 1 6 V CC Positive Going Negative Going V LED (Turn-On) (Turn-Off O NC 2 V 5 OUT OFF 0V to 20V 0V to 20V LOW ON 0V to 8.1V 0V to 7.1V LOW V CATHODE 3 4 EE ON 8.1V to 9.1V 7.1V to 8.1V TRANSITION ON 9.1V to 20V 8.1V to 20V HIGH NOTE: A 1-F bypass capacitor must be connected between pins V and V . CC EE Ordering Information ACPL-P345 is UL Recognized with 3750V for 1 minute per UL1577. ACPL-W345 is UL Recognized with 5000 V for RMS RMS 1 minute per UL1577. Option IEC/EN/DIN EN Part Number RoHS Compliant Package Surface Mount Tape and Reel 60747-5-5 Quantity ACPL-P345 -000E Stretched SO-6 X 100 per tube ACPL-W345 -500E X X 1000 per reel -060E X X 100 per tube -560E X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-P345-560E to order product of Stretched SO-6 Surface Mount package in Tape and Reel packaging with IEC/EN/ DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACPL-W345-000E to order product of Stretched SO-6 Surface Mount package in Tube packaging and RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Broadcom AV02-4079EN 2