ACPL-M483/P483/W483 Inverted Logic High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Description Features The ACPL-M483/P483/W483 fast-speed optocoupler contains a Inverted output type (totem pole output) AlGaAs LED and photo detector with built-in Schmitt trigger to Truth Table Guaranteed: V from 4.5V to 30V CC provide logic-compatible waveforms, eliminating the need for Performance Specified for Common IPM Applications Over additional wave shaping. The totem pole output eliminates the Industrial Temperature Range need for a pull-up resistor and allows for direct drive Intelligent Short Maximum Propagation Delays Power Module or gate drive. Minimized propagation delay Minimized Pulse Width Distortion (PWD) difference between devices makes these optocouplers Very High Common Mode Rejection (CMR) excellent solutions for improving inverter efficiency through reduced switching dead time. Hysteresis Available in SO-5 (ACPL-M483) and Stretched SO-6 package (ACPCL-P483/W483) Functional Diagram Package Clearance/Creepage at 8 mm (ACPL-W483) ACPL-M483 Safety Approval: Anode 1 6 V CC UL Recognized with 5000V (ACPL-W483) for 1 RMS minute per UL1577. 5 V O CSA Approved. Cathode 3 4 Ground SHIELD IEC/EN/DIN EN 60747-5-5 Approved with V = IORM 567 V for ACPL-M483, V = 891 V for peak IORM peak ACPL-P483, and V = 1140 V for ACPL-W483, IORM peak ACPL-P483 and ACPL-W483 under option 060. Anode 1 6 V CC N.C. 2 5 V O Specifications Cathode 3 4 Ground SHIELD Wide Operating Temperature Range: 40C to +105C Maximum Propagation Delay t /t = 120 ns/120 ns PHL PLH Note: A 0.1 F bypass capacitor must be connected between Maximum Pulse Width Distortion (PWD) = 50 ns pins 4 and 6. Truth Table Guaranteed: V from 4.5V to 30V. CC Propagation Delay Difference: Min/Max = 100 ns/+100 ns Wide Operating V Range: 4.5V to 30V CC Truth Table (Inverting Logic) 30 kV/s Minimum Common Mode Rejection (CMR) at V = 1000V CM V LED 0 CAUTION It is advised that normal static precautions be On LOW taken in handling and assembly of this OFF HIGH component to prevent damage and/or degradation which may be induced by ESD. Broadcom - 1 -ACPL-M483/P483/W483 Data Sheet Applications IPM Interface Isolation Isolated IGBT/MOSFET Gate Drive AC and Brushless DC Motor Drives Industrial Inverters General Digital Isolation Ordering Information ACPL-M483/P483/W483 is UL recognized with 3750/3750/5000V /1 minute rating per UL 1577, respectively. RMS Option IEC/EN/DIN EN Part Number Package Surface Mount Tape and Reel Quantity 60747-5-5 RoHS Compliant -000E X 100 per tube -500E X X 1500 per reel Stretched ACPL-M483 SO-5 -060E X X 100 per tube -560E X X X 1500 per reel -000E X 100 per tube -500E X X 1000 per reel ACPL-P483 Stretched ACPL-W483 SO-6 -060E X X 100 per tube -560E X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an ordering part number. Example 1: ACPL-P483-560E: Stretched SO-6 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval and RoHS compliant. Example 2: ACPL-P483-000E to order product of Stretched SO-6 Surface Mount package in Tube packaging and RoHS compliant. Example 3: ACPL-M483-000E to order product of SO-5 Surface Mount package in Tube packaging and RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Recommended Pb-Free IR Profile The recommended reflow profile is per JEDEC Standard, J-STD-020 (latest revision). Non-halide flux should be used. Regulatory Information The ACPL-M483/P483/W483 is approved by the following organizations: IEC/EN/DIN EN 60747-5-5 (Option 060 only): Approved with Maximum Working Insulation Voltage V = 567V for IORM peak ACPL-M483, V = 891V for ACPL-P483, and V = 1140V for ACPL-W483. IORM peak IORM peak UL: Approval under UL 1577, component recognition program up to V = 3750V File E55361 for ACPL-M483 and ISO RMS ACPL-P483. Approval under UL 1577, component recognition program up to V = 5000V File E55361 for ACPL-W483 ISO RMS CSA: Approval under CSA Component Acceptance Notice 5, File CA 88324. Broadcom - 2 -