HCPL-2300, HCPL-0300 8 MBd Low Input Current Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Features Description Guaranteed low thresholds: I = 0.5 mA, V 1.5 V The HCPL-2300/HCPL-0300 optocoupler combines F F an 820 nm AlGaAs photon emitting diode with an High speed: guaranteed 5 MBd over temperature integrated high gain photon detector. This combina-tion Versatile: compatible with TTL, LSTTL and CMOS of Avago designed and manufactured semiconductor Efficient 820 nm AlGaAs LED devices brings new high performance capabilities to designers of isolated logic and data communication cir- Internal shield for guaranteed common mode cuits. rejection The new low current, high speed AlGaAs emitter manu- Schottky clamped, open collector output with factured with a unique diffused junction, has the virtue optional integrated pull-up resistor of fast rise and fall times at low drive currents. Figure 6 il- Static and dynamic performance guaranteed from lustrates the propagation dela y vs. input current charac- -40C to 85C teristic. These unique characteristics enable this device Safety approval to be used in an RS-232-C inter face with ground loop iso- lation and improved common mode rejection. As a line UL recognized -3750 V rms for 1 minute receiver, the HCPL-2300/HCPL-0300 will operate over CSA approved longer line lengths for a given data rate because of lower IEC/EN/DIN EN60747-5-5 approved with I and V specifications. F F V = 630 V (Option 060) IORM peak Applications Functional Diagram Ground loop elimination Computer-peripheral interfaces NC 1 8 V CC Level shifting Microprocessor system interfaces ANODE 2 7 R L Digital isolation for A/D, D/A conversion RS-232-C interface CATHODE 3 6 V High speed, long distance isolated line receiver OUT 4 5 NC GND A 0.1 pF bypass capacitor must be connected between pins 5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The output of the shielded integ rated detector circuit is Schematic an open collector Schottky clamped tran sistor. The shield, which shunts capacitively coupled common mode noise to ground, provides a guaranteed transient immunity specification of 100 V/s. The output circuit includes an optional integrated 1000 pull-up resistor for the open collector. This gives designers the flexibility to use the internal resistor for pull-up to five volt logic or to use an external resistor for connec tion to supply voltages up to 18 V (CMOS logic voltage). The Electrical and Switching Characteristics of the HCPL-2300/HCPL-0300 are guaranteed over a tempera- ture range of -40C to 85C. This enables the user to con- fidently design a circuit which will operate under a broad range of operating conditions. Ordering Information HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and are approved under CSA Component Ac- ceptance Notice 5, File CA 88324. Option Part RoHS non RoHS Surface Gull Tape & UL 5000 Vrms/ IEC/EN/DIN Number Compliant Compliant Package Mount Wing Reel 1 Minute rating EN 60747-5-5 Quantity -000E no option 50 per tube -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel HCPL-2300 300 mil DIP-8 -060E 060 X 50 per tube -360E 360 X X X 50 per tube -560E 560 X X X X 1000 per reel -000E no option X 100 per tube HCPL-0300 SO-8 -500E 500 X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Combination of Option 020 and Option 060 is not available. Example 1: HCPL-2300-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. 2
