HCPL-263L-520E Broadcom

HCPL-260L/060L/263L/063L High Speed LVTTL Compatible 3.3 V Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The HCPL-260L/060L/263L/063L are optically coupled 3.3V/5V Dual Supply Voltages gates that combine a GaAsP light emitting diode and Low power consumption an integrated high gain photo detector. An enable in- 15 kV/s minimum Common Mode Rejection (CMR) at put allows the detector to be strobed. The output of V = 1000 V CM the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed High speed: 15 MBd typical common mode transient immunity specification of LVTTL/LVCMOS compatible 15 kV/s at 3.3V. Low input current capability: 5 mA This unique design provides maximum AC and DC circuit Guaranteed AC and DC performance over tempera- isolation while achieving LVTTL/LVCMOS compati-bili- ture: 40 C to +85 C ty. The optocoupler AC and DC operational parameters Available in 8-pin DIP, SOIC-8 are guaranteed from 40 C to +85 C allowing trouble- free system performance. Strobable output (single channel products only) These optocouplers are suitable for high speed logic Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5 interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot Applications tolerate and are recommended for use in extremely high ground or induced noise environments. Isolated line receiver Computer-peripheral interfaces Functional Diagram Microprocessor system interfaces HCPL-260L/060L HCPL-263L/063L 1 V ANODE 1 1 V Digital isolation for A/D, D/A conversion NC 8 8 CC CC Switching power supply ANODE CATHODE 1 V 2 7 V 2 7 O1 E Instrument input/output isolation CATHODE CATHODE 2 3 6 V 3 6 V O O2 Ground loop elimination 4 5 GND ANODE 2 4 5 GND NC SHIELD SHIELD Pulse transformer replacement Truth Table Truth Table Field buses (Positive Logic) (Positive Logic) LED Enable Output LED Output ON H L ON L OFF H H OFF H ON L H OFF L H ON NC L OFF NC H CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 Option UL 5000 RoHS Non RoHS Gull Tape Surface Vrms/ 1 Min- IEC/EN/DIN Part number Compliant Compliant Package Mount Wing & Reel ute rating EN 60747-5-5 Quantity -000E No option 50 per tube -300E -300 X X 50 per tube -500E #500 X X X 1000 per reel -020E -020 X 50 per tube 300mil HCPL-260L DIP-8 -320E -320 X X X 50 per tube -520E -520 X X X X 1000 per reel -060E #060 X 50 per tube -560E #560 X X X X 1000 per reel -000E No option 50 per tube -300E #300 X X 50 per tube -500E #500 X X X 1000 per reel -020E #020 X 50 per tube 300mil HCPL-263L DIP-8 -320E -320 X X X 50 per tube -520E #520 X X X X 1000 per reel -060E -060 X 50 per tube -560E -560 X X X X 1000 per reel -000E No option X 100 per tube -500E #500 X X 1500 per reel HCPL-060L SO-8 -060E #060 X X 100 per tube -560E -560 X X X 1500 per reel -000E No option X 100 per tube -500E #500 X X 1500 per reel HCPL-063L SO-8 -060E -060 X X 100 per tube -560E -560 X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Combination of Option 020 and Option 060 is not available. Example 1: HCPL-260L-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: HCPL-263L to order product of 300mil DIP package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation #XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. 2