HCPL-3760-000E Broadcom

HCPL-0370, HCPL-3700, HCPL-3760 Isolated Voltage/Current Detectors Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The HCPL-0370/3700 and HCPL-3760 are voltage/cur- Standard (HCPL-0370/3700) and low input current rent threshold detection optocouplers. The HCPL-3760 is (HCPL-3760) versions a low-current version of the HCPL-0370/3700. To obtain AC or DC input lower current operation, the HCPL-3760 uses a high-effi - Programmable sense voltage ciency AlGaAs LED which provides higher light output at lower drive currents. The devices utilize threshold sens- Hysteresis ing input buffer ICs which permit control of threshold Logic compatible output levels over a wide range of input voltages with a single Thresholds guaranteed over temperature external resistor. Thresholds independent of LED optical parameters The input buffer incorporates several features: hysteresis Recognized under UL 1577 and CSA approved for for extra noise immunity and switching immunity, a di- dielectric withstand proof test voltage of 3750 Vac, 1 ode bridge for easy use with ac input signals, and inter- minute nal clamping diodes to protect the buffer and LED from a wide range of over-voltage and over-current transients. Applications Because threshold sensing is done prior to driving the LED, variations in optical coupling from the LED to the Limit switch sensing detector will have no effect on the threshold levels. Low voltage detector AC mains and DC link voltage detection Functional Diagram Relay contact monitor AC 1 8 V Relay coil voltage monitor CC Current sensing DC+ 2 7 NC Microprocessor interfacing DC- 3 6 V O AC 4 5 GND TRUTH TABLE (POSITIVE LOGIC) INPUT OUTPUT H L L H HCPL-3700 Functional Diagram CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.The HCPL-0370/3700s input buffer IC has a nominal turn on threshold of 2.5 mA (I +) and 3.7 volts (V +). TH TH The buffer IC for the HCPL-3760 was redesigned to permit a lower input current. The nominal turn on threshold for the HCPL-3760 is 1.2 mA (I +) and 3.7 volts (V +). TH TH The high gain output stage features an open collector output providing both TTL compatible saturation voltages and CMOS compatible break down voltages. By combining several unique functions in a single package, the user is provided with an ideal component for indus- trial control computer input boards and other applications where a pre deter mined input threshold level is desirable. Ordering Information HCPL-0370/HCPL-3700/HCPL-3760 is UL Recognized with 3750 Vrms for 1 minute per UL1577 unless otherwise specified. Option UL 5000 Part RoHS Non-RoHS Surface Gull Tape Vrms/1 IEC/EN/DIN number Compliant Compliant Package Mount Wing & Reel Minute EN 60747-5-5 Quantity HCPL- -000E No option SO-8 X 100 per tube 0370 -500E -500 X X 1500 per reel -060E NA X X 100 per tube -560E NA X X X 1500 per reel HCPL- -000E No option 300 mil 50 per tube 3700 DIP-8 -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel -020E -020 X 50 per tube -320E -320 X X X 50 per tube -520E -520 X X X X 1000 per reel -060E NA X 50 per tube -360E NA X X X 50 per tube -560E NA X X X X 1000 per reel HCPL- -000E No option 300 mil 50 per tube 3760 DIP-8 -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel -060E NA X 50 per tube -360E NA X X X 50 per tube -560E NA X X X X 1000 per reel Note: NA = Not available. To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-3760-500E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with and RoHS compliant. Example 2: HCPL-3700 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. 2