HCPL-4100 Optically Coupled 20 mA Current Loop Transmitter Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Guaranteed 20 mA loop parameters The HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20mA current loop. Data input compatible with LSTTL, TTL and CMOS 20 mA current loop systems conventionally signal a Logic logic high state by transmitting 20 mA of loop current Internal shield for High Common Mode rejection (MARK), and signal a logic low state by allowing no 20 kBaud data rate at 400 metres line length more than a few milliamperes of loop current (SPACE). Optical coupling of the signal from the logic input to the Guaranteed On and Off output current levels 20 mA current loop breaks ground loops and provides Safety approval very high immunity to common mode interference. UL Recognized -3750 V rms for 1 minute The HCPL-4100 data input is compatible with CSA Approved LSTTL, TTL, or CMOS logic gates. The input integrated Optically coupled 20 mA current loop receiver, circuit drives a GaAsP LED. The light emitted by the LED is HCPL-4200, also available sensed by a second integrated circuit that allows 20 mA to pass with a voltage drop of less than 2.7 volts when Applications no light is emitted and allows less than 2 mA to pass Isolated 20 mA current loop transmitter in: when light is emitted. The transmitter output is capable Computer peripherals of withstanding 27 volts. The input integrated circuit Industrial control equipment provides a controlled amount of LED drive current and Data communications equipment takes into account any LED light output degradation. The internal shield allows a guaranteed 1000 V/s common mode transient immunity. Functional Diagram A 0.1 F bypass capacitor connected between pins 8 and 5 is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information HCPL-4100 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option RoHS Non-RoHS Part number Compliant Compliant Package Surface Mount Gull Wing Tape & Reel Quantity -000E No option 50 per tube 300 mil HCPL-4100 -300E 300 X X 50 per tube DIP-8 -500E 500 X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-4100-500E to order product of Gull Wing Surface Mount package in Tape and Reel packaging in RoHS compliant. Example 2: HCPL-4100 to order product of 300 mil DIP package in tube packaging and non-RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. Package Outline Drawings 8-Pin DIP Package (HCPL-4100) 7.62 0.25 9.65 0.25 (0.300 0.010) (0.380 0.010) 8 7 6 5 6.35 0.25 TYPE NUMBER (0.250 0.010) DATE CODE A XXXX YYWW UL 1 2 3 4 RECOGNITION 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) (0.010 - 0.002) 3.56 0.13 4.70 (0.185) MAX. (0.140 0.005) 0.51 (0.020) MIN. 2.92 (0.115) MIN. 1.080 0.320 0.65 (0.025) MAX. (0.043 0.013) DIMENSIONS IN MILLIMETERS AND (INCHES). 2.54 0.25 (0.100 0.010) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 2 UR