HCPL-M456-000E Broadcom

HCPL-M456 Small Outline, 5 Lead Intelligent Power Module Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The HCPL-M456 consists of a GaAsP LED optically coupled Performance specified for common IPM applications to an integrated high gain photo detector. Minimized over industrial temperature range: -40 C to 100 C propagation delay difference between devicesmake Fast maximum propagation delays these optocouplers excellent solutions for improving t = 400 ns, t = 550 ns PHL PLH inverter efficiency through reduced switching dead time. Minimized Pulse Width Distortion (PWD = 370 ns) Specifications and performance plots are given for typical Very high Common Mode Rejection (CMR): IPM applications. 15 kV/ s at V = 1500 V CM CTR > 44% at I = 10 mA F Schematic Diagram Safety approval UL recognized per UL1577 (file no. E55361) 1 6 3750Vms for 1 minute Truth Table Lead free option -000E 5 LED V O Applications ON L 3 4 SHIELD IPM isolation OFF H Isolated IGBT/MOSFET gate drive AC and brushless dc motor drives Industrial inverters The connection of a 0.1 F bypass capacitor between pins 4 and 6 is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information HCPL-M456 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option RoHS Non RoHS Tape IEC/EN/DIN Part number Compliant Compliant Package Surface Mount & Reel EN 60747-5-2 Quantity HCPL-M456 -000E No option SO-5 X 100 per tube -500E 500 X X 1500 per reel -060E -060 X X 100 per tube -560E -560 X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-M456-560E to order product of SO-5 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant. Example 2: HCPL-M456 to order product of SO-5 Surface Mount package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. HCPL-M456 Outline Drawing Pin Location (for reference only) 1 6 V ANODE CC MXXX 7.0 0.2 5 V OUT 4.4 0.1 (0.276 0.008) XXX (0.173 0.004) 3 4 CATHODE GND TYPE NUMBER (LAST 3 DIGITS) DATE CODE 0.4 0.05 (0.016 0.002) 3.6 0.1* (0.142 0.004) 0.102 0.102 0.15 0.025 2.5 0.1 (0.004 0.004) (0.006 0.001) (0.098 0.004) 7 MAX. 0.71 1.27 BSC MIN (0.028) (0.050) MAX. LEAD COPLANARITY = 0.102 (0.004) Dimensions in millimeters (inches) * Maximum mold flash on each side is 0.15 mm (0.006) Note: Floating lead protrusion is 0.15 mm (6 mils) max. 2