HCPL-T250-500E Broadcom

HCPL-T250 1.5 Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The HCPL T250 contains GaAs LED. The LED is optically Input threshold current (I ): 5 mA (max.) FLH coupled to an integrated circuit with a power output stage. Supply current (I ): 11 mA (max.) CC This optocoupler is ideally suited for driving power IGBTs Supply voltage (V ): 1535 V CC and MOSFETs used in motor control inverter applications. Output current (I ): 0.5 A (min.) O The high operating voltage range of the output stage Switching time (t /t ): 0.5 s (max.) PLH PHL provides the drive voltages required by gate controlled Isolation voltage (V ): 3750 Vrms (min.) devices. The voltage and current supplied by this optocou ISO pler makes it ideally suited for directly driving IGBTs with UL 1577 recognized: File No. E55361 ratings up to 1200 V/25 A. For IGBTs with higher ratings, CSA approved the HCPL T250 can be used to drive a discrete power stage IEC/EN/DIN EN 607475 2 approved with V = 630 IORM which drives the IGBT gate. Vpeak 5 kV/s Minimum Common Mode Rejection (CMR) at Functional Diagram Vcm = 1500 V Creepage distance: 7.4 mm N/C 1 8 V Clearance: 7.1 mm CC Q1 Applications V ANODE 2 7 O IGBT/MOSFET gate drive CATHODE 3 6 V O AC/brushless DC motor drives Q2 Industrial inverters N/C 4 5 V EE SHIELD Switch mode power supplies Truth Table LED V out ON HIGH OFF LOW A 0.1 F bypass capacitor must be connected between pins 5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information HCPL T250 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option Part RoHS Non RoHS Surface Gull Tape IEC/EN/DIN Number Compliant Compliant Package Mount Wing & Reel EN 60747-5-2 Quantity 000E No option 50 per tube 300E 300 X X 50 per tube 500E 500 X X X 1000 per reel 300 mil HCPL T250 060E 060 DIP8 X 50 per tube 360E 360 X X X 50 per tube 560E 560 X X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the op tion column to form an order entry. Example 1: HCPL T250560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 6074752 Safety Approval in RoHS compliant. Example 2: HCPL T250 to order product of 300 mil DIP package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. th Remarks: The notation XXX is used for existing products, while (new) products launched since 15 July 2001 and RoHS compliant option will use XXXE. 2