9001-05-00 Coto

9000 SERIES/MOLDED SIP REED RELAYS 9000 Series High Performance SIP Reed Relays e STh IP relay is the industry standard when high reliability and consistent perfor- mance are desired in a compact package. The 9001 and 9002 are high performance relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Tele- communications applications. The specicfi ation tables allow you to select the appropri- ate relay for your application. 9000 Series Features 12 13 u High Insulation Resistance - 10 minimum (10 typical) u High reliability, hermetically sealed contacts for long life (tested up to 1 Billion Operations) u High dielectric strength available, consult factory u High speed switching compared to electromechanical relays u Molded thermoset body on integral lead frame design u Coaxial Shield for 50 impedance and switching of fast rise time digital pulses - 9002 only u Optional Coil Suppression Diode - protects coil drive circuits u UL File E67117, CSA File 028537 - Contact factory for details u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9001 Model 9002 .760 Max (19.3) .200 Max (5.08) .760 Max (19.3) .780 Max200 Max (5.08) .780 Max222 Max. (5.64) w/Shell (19.8) w/Shell (19.8) w/Shell .222 Max. (5.64) w/Shell .133 (3.4) Max020 .020 .300 Max (7.6) .133 (0.5) (0.5) .300 Max (7.6) .320 Max. (8.1) w/Shell (3.4) Max320 Max. (8.1) w/Shell .020 REF100 (Typ.) .010 (0.51) (2.54) .200 (Typ.) (0.25) .200 (Typ.) .010 (5.08) (5.08) (0.25) o 30 Alternate Package .760 Max (19.3) .200 Max (5.08) .780 Max222 Max. (5.64) w/Shell (19.8) w/Shell .020 .300 Max (7.6) (0.5) .320 Max. (8.1) w/Shell .133 .020 REF. (3.4) Max200 (Typ.) Ordering Information (0.51) .010 (5.08) (0.25) 90XX-XX-XX Part Number Model Number General Options 9001 9002 0 = No Diode 2 1 = Diode Coil Voltage 05=5 volts NOTE Magnetic Shield Option 12=12 volts u For RF Graph Performance, see RF Graphs section 0 = No Shield of the Reed Relay Technical & Application Information 1 = Shield 07082013 tel: (401) 943.2686 fax: (401) 942.09202 2 9001 9002 MODEL NUMBER Parameters Test Conditions Units 4 Pin SIP 6 Pin SIP COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 Coil Resistance +/- 10%, 25 C 500 1000 350 750 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 1000 1000 Static Contact 50mV, 10mA 0.150 0.150 Resistance (max. init.) Dynamic Contact 0.5V, 50mA 0.200 0.200 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 12 12 10 10 (minimum) at 100V, 25C, 40% RH No Shield pF 0.7 - Capacitance - Typical Shield Floating pF - 0.8 Across Open Contacts Shield Guarding pF - 0.1 No Shield pF 1.4 - Open Contact to Coil Shield Floating pF - 1.4 Shield Guarding pF - 0.5 Contact to Shield Contacts Open, Shield Floating pF - 1.4 Between Contacts VDC/peak AC 300 300 Dielectric Strength Contacts to Coil VDC/peak AC - 1500 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.35 0.35 bounce - Typical 30 Hz Square Wave Release Time - Typical msec. 0.1 0.1 1 1 Top View: 5 Dot stamped on relay refers to pin 1 2 2 Grid = .1x.1 (2.54mm x 2.54mm) 3 3 6 4 4 Notes: 1 Consult factory for life expectancy at other switching loads. Resistance >0.5 defines end of life or failure to open. 2 Optional diode is connected to pin 2(+) and pin 3(-). Correct coil polarity must be observed. Environmental Ratings: + + Storage Temp: -35C to 100C Operating Temp: -20C to 85C Solder Temp: 270C max 10 sec. max All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 Gs to 2000 Hz Shock: 50 Gs 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.