Critical Link, LLC MitySOM-5CSX Development Kit www.CriticalLink.com 6 August 2014 FEATURES MitySOM-5CSX Development Board MitySOM-5CSX SoM Module Additional Hardware Included: UART to USB Cable Ethernet Cable AC to DC 24V 2.7A Adapter Software and Documentation: Integrated +2.5V/+3.3V/+5V/+12V Linux Kernel Power Supplies uBoot Development Environment - Virtual ATX Power Supply Compatible Machine Development Board Schematics Digital Interfaces: Development Board Gerber Files 10/100/1000 MBit Ethernet Interface Development Board BOM Debug UART to USB USB OTG Interface APPLICATIONS Dual Electrically Isolated CAN Bus MitySOM-5CSX Evaluation Interfaces Test and Measurement SD/MMC Card Socket Factory Automation Industrial Automation Expansion Embedded Instrumentation Full HSMC Interface Test and Measurement Partial HSMC Interface Rapid Prototyping PCI-e x4 DESCRIPTION The MitySOM-5CSX Development Kit provides all the hardware and software support for system designers and developers to evaluate the Critical Link MitySOM-5CSX System on Module. The MitySOM-5CSX Development Kit comes complete with the MitySOM-5CSX module that meets your projects needs. The MitySOM-5CSX Development Kit includes on-board Debug UART to USB converter, 10/100/1000 GBit Ethernet, Universal Serial Bus (USB 2.0) USB-On-The-Go (OTG) communication interfaces. Full and Partial HSMC connectors are compatible with a wide range of existing add-on cards, dual electrically isolated CAN and PCI-e x4 expansion ports provide a comprehensive set of interface options. Multi Media Card (MMC) interface supporting Secure Digital (SD) cards. Configuration dip-switches, debug switches, RTC battery and a SOM current input monitoring circuit round out the Development Kit. All powered from a single 24VDC input (adapter included) or a standard ATX PC power supply with onboard +2.5V/+3.3V/+5V/12V power supplies. 1 Copyright 2007-2013, Critical Link LLC Critical Link, LLC MitySOM-5CSX Development Kit www.CriticalLink.com 6 August 2014 A block diagram of the MitySOM-5CSX Development Kit is illustrated in Figure 1 on the following page. Control of the on-board interface hardware and connected Expansion IO cards require proper configuration of the MitySOM-5CSX Module. While not required, it is strongly recommended that the MitySOM software development kit and supplied API be used to manage these interfaces. MitySOM-5CSX Development Kit MitySOM-5CSX HID / Thumb drive USB OTG UART to USB PC Serial Bridge Port SD SD Card Connector RJ-45 & Micrel KSZ9031 Ethernet 10/100/1000 Magnetics Ethernet PHY Full HSMC Interface 160-Pin HSMC (89 IO Pins Connected) Full HSMC JTAG Debug 10-pin Header Interface Altera Partial HSMC Interface Cyclone V SX/SE SoC 160-Pin HSMC (20 IO Pins Connected) Dual Arm Cortex-A8 Up to 925MHz PC/Modules PCIe 4X Header SATA Header Status/Debug LE D s Indicators Buttons Reset and Debug Dip Switches Configuration Switches 10-pin Header ISO 1050 CAN 1 10-pin Header ISO 1050 CAN 2 +1.8V From MityArm Module Battery (RTC) +5V MityArm Module +18V to 24V +3.3V Peripherals or Power ATX Power Supply Management +5V ISO 2 (CAN 2) Input +1.2V Ethernet +12V PCIe Figure 1: MitySOM-5CSX Development Kit Block Diagram Additional details about the Cyclone V SX/SE SoC, available peripherals, their features and FPGA IO details are provided in the data sheet at the Altera website (