Critical Link, LLC MitySOM-A10S www.CriticalLink.com 22 Oct 2020 FEATURES Intel Arria 10 SX Processor - Dual ARM Cortex- A9 MPU - Up to 1500 MHz Max clock speed - Dual NEON SIMD Coprocessors - 32 KB L1 Program Cache (per core) - 32 KB L1 Data Cache (per core) - 512 KB L2 Cache (shared) - 256 KB on-chip RAM - Up to 138 User FPGA I/O Pins - Up to 30 Shared HPS/FPGA I/O Pins - Up to 4 additional HPS Only Pins - Twelve 11.3 Gbps Transceiver Pairs Mechanical - 101.5mm (4) x 101.5mm (4) size Memory Interfaces - 1 Samtec 320 pin board to board - Bank 1 : Up to 4 GB DDR4 connector 32 bits wide - 1 Hirose 144 Pin board to board 8.5 GB/sec burst transfer rate connector Shared with HPS - 2 Fan Connectors - Bank 2 : Up to 2 GB DDR4 16 bits wide Hard Processor System (HPS) 4.24 GB/sec burst transfer rate - Up to 3 10/100/1000 Mbps Ethernet Dedicated to FPGA MACs - 1 USB 2.0 OTG Port Integrated Power Management - Up to 2 UARTs JTAG connector on-module - 1 MMC/SD/SDIO On Board USB 2.0 PHY - Up to 2 SPI Masters and 2 SPI Slaves On Board MicroSD Connector - Up to 3 I2C controllers Optional eMMC On Board RTC APPLICATIONS 2 On Board Temperature Sensors Machine Vision Power, Reset and Clock Management Life Science Vision applications Test and Measurement FPGA Fabric Embedded Instrumentation - Up To 480K Logic Elements (LE) Industrial Automation and Control - 460Mhz Global Clock Industrial Instrumentation - Up To 28Mb M20K Memory - Up To 4.3Mb MLAB Memory Medical Instrumentation - Up To 1368 Floating Point Multipliers - Up To 2736 Fixed Point Multipliers BENEFITS - 32 Global Clock Networks Rapid Development / Deployment Multiple Connectivity and I/O Options Serial Transceivers Rich User Interfaces - Twelve 11.3 Gbps Transceivers High System Integration - 1 x8 PCIe Hard IP Block (Up to Gen 3) - 1 x4 Bonded Set Supports OpenCL and HLS acceleration High Level OS Support - Embedded Linux 1 6712 Brooklawn Parkway PHONE 315.425.4045 Syracuse, NY 13211 FAX 315.425.4048 www.CriticalLink.com Document 60-000028-1F Critical Link, LLC MitySOM-A10S www.CriticalLink.com 22 Oct 2020 DESCRIPTION The MitySOM-A10S is a highly configurable, medium form-factor System-on-Module (SOM) featuring an Intel Arria 10 System-on-Chip (SoC). In addition to the processor, the module includes on-board power supplies, two DDR4 RAM memory subsystems, optional eMMC, micro SD card, a fan controller, RTC, a USB 2.0 on the go (OTG) port, and a temperature sensor. The MitySOM-A10S provides a complete and flexible CPU infrastructure for highly integrated embedded systems. The MitySOM-A10S is available with a 270 K Logic Element (KLE) Arria 10 SX which provides Dual- core Cortex-A9 32-bit RISC processors with dual NEON SIMD coprocessors. Options for 160 and 480 KLE devices are also available. This MPU can run a rich set of real-time operating systems containing software applications programming interfaces (APIs) expected by modern system designers. The ARM architecture supports several operating systems, including Linux. Figure 1 illustrates a block diagram of the MitySOM-A10S. As shown in the figure, the primary interface to the MitySOM-A10S is through a 320 Pin and a 144 Pin vertical board-to-board mezzanine connector. The MitySOM-A10S is intended to interface to a carrier card base module for applications development. Details of the board-to-board interfaces are included in the Interface Description section. 2 6712 Brooklawn Parkway PHONE 315.425.4045 Syracuse, NY 13211 FAX 315.425.4048 www.CriticalLink.com Document 60-000028-1F