02/11/2015 www.crouzet.com Analogue extension XA04 Part number 88970241 Direct connection of analogue 0-10 V or 0-20mA or Pt100 inputs (10 bit) can be configured using the M3 Soft software 2 analogue 0-10 V or PWM outputs (10 bit) can be configured using the M3 Soft software Ramp can be parameterised for outputs used as 0-10 V outputs Power supply via the controller Part numbers Type Inputs Outputs Supply 88970241 XA04 1 analogue (0-10 V / 0-20mA),1 analogue (0-10 V / 0-20mA / Pt100) 2 analogue (0-10 V / PWM) Via the 24 V DC controller Specifications General environment characteristics for CB, CD, XD, XB, XR and XE product types Certifications CE, UL, CSA, GL Conformity to standards (with the low voltage directive IEC/EN 61131-2 (Open equipment) and EMC directive) IEC/EN 61131-2 (Zone B) IEC/EN 61000-6-2, IEC/EN 61000-6-3 (*) IEC/EN 61000-6-4 (*) Except configuration (889701.1 or 889701.2) + (88970250 or 88970270) + 88970241 class A (class B in a metal enclosure) Earthing None Protection rating In accordance with IEC/EN 60529: IP40 on front panel IP20 on terminal block Overvoltage category 3 in accordance with IEC/EN 60664-1 Pollution Degree: 2 in accordance with IEC/EN 61131-2 Max operating Altitude Operation: 2000 m Transport: 3,048 m Mechanical resistance Immunity to vibrations IEC/EN 60068-2-6, Fc test Immunity to shock IEC/EN 60068-2-27, Fa test Resistance to electrostatic discharge Immunity to ESD IEC/EN 61000-4-2, level 3 Resistance to HF interference Immunity to radiated electrostatic fields IEC/EN 61000-4-3, Immunity to fast transients (burst immunity) IEC/EN 61000-4-4, level 3 Immunity to shock waves IEC/EN 61000-4-5 Radio frequency in common mode IEC/EN 61000-4-6, level 3 Voltage dips and breaks (AC) IEC/EN 61000-4-11 Immunity to damped oscillatory waves IEC/EN 61000-4-12 Conducted and radiated emissions Class B (*) in accordance with EN 55022, EN 55011 (CISPR22, CISPR11) group 1 (*) Except configuration (889701.1 or 889701.2) + (88970250 or 88970270) + 88970241 class A (class B in metallic cabinet) Operating temperature -20+55C(+40Cinanon-ventilated enclosure) in accordance with IEC/EN 60068-2-1 and IEC/EN 60068-2-2 Storage temperature -40+70CinaccordancewithIEC/EN60068-2-1 and IEC/EN 60068-2-2 Relative humidity 95% max. (no condensation or dripping water) in accordance with IEC/EN 60068-2-30 Mounting On symmetrical DIN profile, 35 x 7.5 mm and 35 mm x 15 or panel (2 x 4 mm ) Screw terminals connection capacity Flexible wire with ferrule = 2 1 conductor: 0.25 to 2.5 mm (AWG 24...AWG 14) 2 2 conductors 0.25 to 0.75 mm (AWG 24...AWG 18) Semi-rigid wire = 2 1 conductor: 0.2 to 2.5 mm (AWG 25...AWG 14) Rigid wire = 2 1 conductor: 0.2 to 2.5 mm (AWG 25...AWG 14) 2 2 conductors 0.2 to 1.5 mm (AWG 25...AWG 16) Tightening torque = 0.5 N.m (4.5 lb-in) (tighten using screwdriver diam. 3.5 mm) Characteristics of analogue extension 88970241 General characteristics Certifications IEC/EN 60751 Earthing Yes, refer to the quick reference guide supplied with the product Analogue input Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com Inputs used as analogue inputs Inputs IP and IQ IP and IQ IQ Input range 010VDC 020mA -25125C Input impedance 18k 246 - Maximum non destructive current/voltage 30 V 30mA - Value of LSB 9,8 mV 20 A 0,15C Input type Common mode Common mode Pt100 probe - IEC 751 - 3-wire Resolution 10 bit 10 bit 10 bit Conversion time Module cycle time Module cycle time Module cycle time Accuracy at 25C 2% 2% 1.5C Accuracy at 55C 2% 2% 1.5C Isolation between analogue channel and power supply None None None Cable length 10 m maximum, with shielded cable (sensor 10 m maximum, with shielded cable (sensor 10 m maximum, with shielded cable (sensor not isolated) not isolated) not isolated) Protection against polarity inversions Command ignored Command ignored Command ignored Analogue outputs Range output 010V Input type Resistive Max. load 10mA Value of LSB 10 mV Resolution 10 bit Conversion time Controller cycle time Accuracy at 25C 1% of full scale Accuracy at 55C 1% of full scale Repeat accuracy at 55C 1% Isolation between analogue channel and power supply None Cable length 10 metres maximum, with shielded cable (sensor not isolated) Protection against polarity inversions Yes PWM Range output V power supply Max. load 1.2k(I20mA) PWM cyclic ratio 1024 steps (0 - 100%) Frequency 78Hz, 312,5Hz, 666,6Hz, 1000Hz, 1250Hz, 1428Hz, 1666Hz, 2000Hz Accuracy 1% across the entire temperature range for PWM ratios from 5% to 95% Built-in protections Against overvoltages: Yes Processing characteristics of CB, CD, XD & XB product types LCD display CD, XD: Display with 4 lines of 18 characters Programming method Function blocks / SCF (Grafcet) or Ladder Program size For CB, CD: 4 Ko: 64 macros max. 256 blocks max. per macro 180 typical blocks For XB, XD: 8 Ko: 64 macro max. 256 blocks max. per macro 350 typical blocks Or for CB, CD, XB, XD: 120 lines in Ladder Program memory Flash EEPROM Removable memory EEPROM Data memory 368 bit/200 words Back-up time in the event of power failure Program and settings in the controller: 10 years Program and settings in the plug-in memory: 10 years Data memory: 10 years Cycle time Functionblocks:690ms(typically20ms) Ladder: typically 20 ms Response time Input acquisition time: 1 to 2 cycle times Clock data retention 10 years (lithium battery) at 25C Clock drift Drift < 12 min/year (at 25C) 6 s/month (at 25C with user-definable correction of drift) Timer block accuracy 1% 2 cycle times Start up time on power up < 1,2 s Characteristics of products with AC power supplied Supply 24 V AC 100240VAC (88970..4) (88970..3) Nominal voltage 24 V AC 100240VAC Operating limits -15% / +20% -15% / +10% or20.4VAC28.8VAC or85VAC264VAC Supply frequency range 50/60Hz (+4% / -6%) 50/60Hz (+4% / -6%)or4753Hz/57<63Hz or4753Hz/57<63Hz Immunity from micro power cuts 10 ms (repetition 20 times) 10 ms (repetition 20 times) Max. absorbed power CB12-CD12-XD10-XB10: 4 VA CB12-CD12-XD10-XB10: 7 VA CB20-CD20: 6 VA CB20-CD20: 11 VA XD10-XB10 with extension: 7,5 VA XD10-XB10 with extension: 12 VA XD26-XB26: 7.5 VA XD26-XB26: 12 VA XD26-XB26 with extension: 10 VA XD26-XB26 with extension: 17 VA Isolation voltage 1780 V AC 1780 V AC Inputs 24 V AC 100240VAC (88970..4) (88970..3) Input voltage 24 V AC (-15% / +20%) 100240VAC(-15% / +10%) Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected