em4 em4 alert em4 alert 3G Connect your equipment to the GPRS 2G / 3G network in any geographical location (worldwide) Get an alert by SMS or email fully controlled by the application program Control and monitor your application by SMS Receive data reports by SMS or datalogs by email or FTP in .CSV (Excel) file Adapt your application along the way of its em4 alert 3G - Glossy black em4 alert 3G - Glossy white lifecycle thanks to the remote application Contact us program update feature via FTP Specific characteristics Part number 88 981 123 88 981 124 Type B26-3GS Inputs 16 digital inputs (including 4 High Speed, 8 analog 0-10 V / potentiometers and 4 analog 0-10 V / 4-20 mA) Outputs 10 digital outputs (including 2 solid states 0.5 A PWM, 2 relays 6 A and 6 relays 8 A) Supply 24 VDC Finish Glossy black Glossy white On front panel color Black RAL 9011 White RAL 9003 On terminal block color Blue RAL 5017 Protection rating IP 40 on front panel (in accordance with IEC/EN 60529) IP 20 on terminal block Weight Without packing: 345 g With packing: 395 g Dimensions Without packing: 124.6 x 90 x 60.6 mm / 4.91 x 3.54 x 2.38 inch With packing: 148 x 103 x 65 mm / 5.83 x 4.06 x 2.56 inch R&TTE Directive 1999/5/EC Standards of North American type approval US-Federal Communications Commission (FCC) Frequency range GSM 850 (Uplink) 824 - 849 MHz (FCC : 824,2 - 848,8 MHz) Frequency range GSM 850 (Downlink) 869 - 894 MHz Frequency range E-GSM 900 (Uplink) 880 - 915 MHz Frequency range E-GSM 900 (Downlink) 925 - 960 MHz Frequency range DCS 1800 (Uplink) 1710 - 1785 MHz Frequency range DCS 1800 (Downlink) 1805 - 1880 MHz Frequency range PCS 1900 (Uplink) 1850 - 1910 MHz (FCC : 1850,2 - 1909,8 MHz) Frequency range PCS 1900 (Downlink) 1930 - 1990 MHz Frequency range UMTS 800 band VI (Uplink) 830 - 840 MHz Frequency range UMTS 800 band VI (Downlink) 875 - 885 MHz Frequency range UMTS 850 band V (Uplink) 824 - 849 MHz I WWW.CROUZET-AUTOMATION.COM I 02 I em4 Frequency range UMTS 850 band V (Downlink) 869 - 894 MHz Frequency range UMTS 900 band VIII (Uplink) 880 - 915 MHz Frequency range UMTS 900 band VIII (Downlink) 925 - 960 MHz Frequency range UMTS 1700 band IV (Uplink) 1710 - 1755 MHz Frequency range UMTS 1700 band IV (Downlink) 2110 - 2155 MHz Frequency range UMTS 1900 band II (Uplink) 1850 - 1910 MHz Frequency range UMTS 1900 band II (Downlink) 1930 - 1990 MHz Frequency range UMTS 2100 band I (Uplink) 1920 - 1980 MHz Frequency range UMTS 2100 band I (Downlink) 2110 - 2170 MHz SIM card Not included Antenna: impedance 50 Antenna: input power > 2 W Antenna: connector RP SMA: SMA female reverse polarity Antenna: V.S.W.R < 2:1 recommended < 3:1 acceptable Antenna: return loss S11 < - 10 dB recommended S11 < - 6 dB acceptable General characteristics Products certification CE, cULus Listed Conformity with the low voltage directive IEC/EN 61131-2 (Open equipment) (in accordance with BT 2006/95/EC) Conformity with the EMC directive IEC/EN 61000-6-1 (Residential, commercial and light-industrial environments) (in accordance with 2004/108/EC) IEC/EN 61000-6-2 (Industrial) IEC/EN 61000-6-3 (Residential, commercial and light-industrial environments) IEC/EN 61000-6-4 (Industrial) Earthing None Overvoltage category 3 in accordance with IEC/EN 60664-1 Pollution Degree: 2 in accordance with IEC/EN 61131-2 Maximum utilization altitude Operation: 2000 m Transport: 3000 m Mechanical resistance Immunity to vibrations IEC/EN 60068-2-6, Fc test Immunity to shock IEC/EN 60068-2-27, Ea test Resistance to electrostatic discharge Immunity to ESD IEC/EN 61000-4-2, level 3 Resistance to HF interference Immunity to radiated electrostatic fields IEC/EN 61000-4-3, level 3 (Immunity) Immunity to fast transients (burst immunity) IEC/EN 61000-4-4, level 3 Immunity to shock waves IEC/EN 61000-4-5 Radio frequency in common mode IEC/EN 61000-4-6, level 3 Conducted and radiated emissions Class B (in accordance with EN 55022/11 group 1) Operation temperature -20C (-4F) +60C (140F) (+40C (104F) in a non-ventilated enclosure) Storage temperature -40C (-40F) +80C (176F) Relative humidity 95% max. (no condensation or dripping water) Screw terminals connection capacity Flexible wire with ferrule: 1 conductor: 0.2 to 2.5 mm (AWG 24-14) Flexible wire with ferrule: 2 conductors: 0.2 to 0.75 mm (AWG 24-18) Rigid wire: 1 conductor: 0.2 to 2.5 mm (AWG 24-14) Rigid wire: 2 conductors: 0.2 to 0.75 mm (AWG 24-18) Tightening torque: 0.5 N.m (4.5 lb-in) (tighten using screwdriver diam. 3.5 mm) Stripping length: 6 mm Processing characteristics LCD display Display with 4 lines of 18 characters Programming method FBD (Function Block Diagram), including SFC (Sequential Function Chart, Grafcet) Program size Function blocks: typically 1000 blocks Macro blocks: 64 max. (256 blocks per macro) Program memory Flash Removable memory N.A Data memory 2 k octets Backup time Program and settings in the controller: 10 years (in the event of power failure) Data memory: 10 years Data backup Data backup in the flash memory is guaranteed if the product is powered on more than 10 seconds