L595020 Crouzet

CONTROL ACCESSORIES CONTROL ACCESSORIES 3.43 (84mm) S5 LEVEL PROBE HOLDER 1.83 1.14 1.93 Single probe holder for use with probe rod of various lengths. This .26 (46.5mm) (29mm) (49mm) (6.5mm) probe is particularly suitable for high temperature and/or high pressure applications. It is capable of operating at temperatures up to 200C (392F) and pressures up to 700PSI. Order part S5. 8 - 32 .51 (13mm) 36 Threaded Rod. Order part number S5/1. NOTE: Internal Threading: 1/4 x 20 3/8 - 18 Dry Seal S8 LEVEL PROBE The S8 probe will hold one, two or three 4mm probes. The S8 comes with three (3) one meter lengths of 4mm stainless steel rod. It comes equipped with a black SBS rubber protective top through which the leads are routed at a 90 angle. SPECIFICATIONS: Material - Holder . Polyamide Material - Top Boot . SBS (Styrene Butadiene) Wire Terminal . Stainless Steel with M2 x 4 brass screws Probe Holder Stainless steel Gasket . BB701 (Butadiene) Thread Size . 1/2 NPT Operating Temp 176F (80C) Top Cover 2 Max Pressure . 2 Kg/CM (28 PSI) Probe Holder Screw, CB M2 x 4 Brass 1.70 Electrode Bearer (43mm) 1.02 .275 .472 (26mm) Thread (7mm) (12mm) .708 (18mm) Gasket, 24 x 31mm (thickness: 2mm) .157 (4mm) 1 to 3 Inox Rod:4mm Note: The end of the rod has to be threaded( 8-32) to L1 fit the probe holder. L2 .076 L3 (2mm) Products and specifications subject to change without notice. Order/Technical Support Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 2/98.312 .1650 .980 1.295 1.575 CONTROL ACCESSORIES CONTROL ACCESSORIES DR DIN-RAIL The DR-DIN-Rail material is an extruded aluminum material of the standard configuration, 35mm. Timers and Controls conveniently snap onto the track. Order part number DR which is available in 1 meter (39) lengths. Shown with S08, S11 and K11 sockets. S08, S11 SCREW TERMINAL 1.42 1.14 SOCKETS (36mm) (29mm) .200 BND DIN Rail 2.30 .315 .58 The S08, and S11 are 8 and 11 pin sockets (8mm) .320 fabricated from a rugged, durable polycarbonate.* .165 Mounting is with two 6/32 screws .250 or on ++ .30 DIN-Rail, DR. Order part S08 or S11. 2.06 .82 .571 1.46 (14.5mm) .079 (37mm) (2mm) .984 2 S08-600: 600 V, 10 A rated 8 pin socket-UL and CSA S11 1.69 S08 (25mm) (43mm) L595 SERIES DIMENSIONS: CURRENT TRANSFORMER 20 to 400 Amps ORDERING INFORMATION: Compatible with IAR.T Series .75 2.3 Part Number Input Current SPECIFICATIONS: L595-020 20 Amps L595-050 50 Amps Input Current . 20 to 400 Amps AC 50/60 Hz L595-100 100 Amps Output Current 100 mA AC L595-200 200 Amps Connections 20 AWG 24 long wires L595-300 300 Amps .75 Insulation Class . 600 VAC L595-400 400 Amps Enclosure Fiberglass reinforced resin L546 SERIES DIMENSIONS: CURRENT TRANSFORMER 50 to 500 Amps ORDERING INFORMATION: Compatible with F3I and FWIT Series 2.54 1.10 Part Number Input Current SPECIFICATIONS: L546-050 50 Amps L546-100 100 Amps Input Current . 50 to 500 Amps AC 50/60 Hz L546-200 200 Amps Output Current 5 Amps AC L546-500 500 Amps Connections 16 AWG 24 long wires 1.10 Insulation Class . 600 VAC Enclosure Molded thermoplastic Products and specifications subject to change without notice. Order/Technical Support Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 2/99 2.01 2.99 (76 mm) .165 (4.19mm) .2.2 (56mm)