SMI-AU-5 CUI Inc

Additional Resources: Product Page date 02/06/2019 page 1 of 2 MODEL: SMI-AU-5 DESCRIPTION: AUSTRALIA BLADE MECHANICAL DRAWING units: mm tolerance: 0.2~2: 0.15 mm 2.0~15: 0.25 mm 15~30.00: 0.30 mm 30~50.00: 0.35 mm unless otherwise noted cui.comAdditional Resources: Product Page CUI Inc MODEL: SMI-AU-5 DESCRIPTION: AUSTRALIA BLADE date 02/06/2019 page 2 of 2 REVISION HISTORY rev. description date 1.0 initial release 02/06/2019 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Fax 503.612.2383 Tualatin, OR 97062 cui.com 800.275.4899 techsupport cui.com CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safet y or effectiveness.