MICROPROCESSOR CORE MODULE DIGI RABBITCORE RCM3400 SERIES The compact, analog-enabled RabbitCore is designed for embedded applications that require analog functionality The RabbitCore RCM3400 series, featuring the Rabbit 3000 Rabbit hardware and Dynamic C are designed in a microprocessor, is designed for embedded control and complementary fashion for maximum performance and monitoring applications requiring analog functionality. Its ease of use in embedded systems. The additional software small size and ease of use when paired with Dynamic C allow components in Dynamic C allow you to add functionality for engineers to develop a control and monitoring solution for embedded application customization. many of todays embedded applications. The Ethernet-ready RCM3400 series comes pre-assigned with a MAC ID, along with a development board 10Base-T reference design. Built-in low EMI features, including a clock spectrum spreader, practically eliminate EMI problems, helping to pass CE and RF emissions tests. BENEFITS APPLICATION EXAMPLE Rabbit 3000 microprocessor at 30 MHz Up to 512K Flash/512K SRAM Ethernet 8 channel 12-bit A/D with programmable gain REMOTE DEVICE CLOUD 47 digital I/O and 5 serial ports (IrDA, HDLC, MONITORING PC asynch, SPI) MAC ID installed YACHT AUTOMATION Cellular/VPN Compact size simplifies integration Ready-made platform for fast time-to-market, up RABBITCORE to 3 months of design integration time savings RCM3400 Low-cost embedded microprocessor module GPS Cellular Module Router RS-232 RELATED PRODUCTS Battery AC/DC Voltage Relay Refridgeration Water Level Temperature Sensor Sensor RabbitCore RabbitCore RabbitCore RabbitCore Dynamic C RCM3000 RCM3100 RCM4300 RCM3600 Series Series Series SeriesSPECIFICATIONS RCM3400 I RCM3410 FEATURE MICROPROCESSOR Rabbit 3000 at 30 MHz 512K 256K FLASH MEMORY SRAM 512K 256K BACKUP BATTERY Connection for user-supplied backup battery (to support RTC and SRAM) 8 channels single-ended or 4 channels differential Programmable gain 1, 2, 4, 5, 8, 10, 16, and 20 V/V ANALOG INPUTS - A/D CONVERTER RESOLUTION 12 bits (11 bits single-ended) - A/D CONVERSION TIME (INCLUDING 120 S RAW COUNT AND DYNAMIC C) 180 s 47 parallel digital I/0 lines: 41 configurable I/O GENERAL-PURPOSE I/O 3 fixed inputs 3 fixed outputs ADDITIONAL INPUTS Startup mode (2), reset in, CONVERT Status, reset out, VREF ADDITIONAL OUTPUTS AUXILIARY I/O BUS Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write 5 shared high-speed, CMOS-compatible ports: All 5 configurable as asynchronous, 3 as clocked serial (SPI), and 2 as SDLC/HDLC SERIAL PORTS 1 asynchronous serial port dedicated for programming Support for MIR/SIR IrDA transceiver SERIAL RATE Maximum asynchronous baud rate = CLK/8 A slave port allows the RCM3400 to be used as an intelligent peripheral device slaved to a master processor, SLAVE INTERFACE which may either be another Rabbit 3000 or any other type of processor REAL-TIME CLOCK Yes TIMERS Ten 8-bit timers (6 cascadable), one 10-bit timer with 2 match registers WATCHDOG/SUPERVISOR Yes PULSE-WIDTH MODULATORS 10-bit free-running counter and four pulse-width registers 2-channel input capture can be used to time input signals from various port pins INPUT CAPTURE QUADRATURE DECODER 2-channel quadrature decoder accepts inputs from external incremental encoder modules POWER 3.03.45 VDC 29.4 MHz, 2.83.45VDC 14.7 MHz 97 mA 3.3V, 29.4 MHz 57 mA 3.0V, 14.7 MHz OPERATING TEMPERATURE -40 C to +85 C HUMIDITY 5% to 95%, non-condensing Two 2 17, 1.27 mm pitch CONNECTORS BOARD SIZE 1.160 1.375 0.31 (29.5 mm 34.9 mm 7.9 mm) PRODUCT WARRANTY 3 year PART NUMBERS DESCRIPTION 20-101-0561 RCM3400 20-101-0562 RCM3410 DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380 leading warranty. For detailed information visit www.digi.com/support. DIGI INTERNATIONAL GERMANY DIGI INTERNATIONAL CHINA 1996-2019 Digi International Inc. All rights reserved. +49-89-540-428-0 +86-21-50492199 / www.digi.com.cn All trademarks are the property of their respective owners. DIGI INTERNATIONAL JAPAN 91001604 C4/319 +81-3-5428-0261 / www.digi-intl.co.jp