DSS20200L 20V PNP LOW SATURATION TRANSISTOR IN SOT23 Features Mechanical Data BV > -20V Case: SOT23 CEO I = -2A Continuous Collector Current Case Material: molded plastic, Green molding compound C I = -4A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM Low Saturation Voltage V < -120mV -1A Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) R = 40m for a low equivalent on-resistance Terminals: Finish Matte Tin Plated Leads, Solderable per CE(SAT) Complimentary NPN Type : DSS20201L MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight: 0.008 grams (approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability SOT23 E C C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 4) Product Marking Reel size (inches) Tape width (mm) Quantity per reel DSS20200L-7 ZP1 7 8 3,000 DSS20200L-13 ZP1 13 8 10,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See DSS20200L Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -20 V CBO Collector-Emitter Voltage V -20 V CEO Emitter-Base Voltage V -7 V EBO Peak Pulse Collector Current I -4 A CM Continuous Collector Current I -2 A C Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 600 Power Dissipation P mW D (Note 6) 1.2 (Note 5) 209 Thermal Resistance, Junction to Ambient Air R JA (Note 6) 104 C/W Thermal Resistance, Junction to Leads (Note 7) 75 R JL Operating and Storage Temperature Range -55 to +150 C T , T J STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted on minimum recommended pad layout with 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except mounted on 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 November 2013 DSS20200L Diodes Incorporated www.diodes.com Document number: DS31604 Rev. 3 - 2