DSS4160DS 60V DUAL NPN LOW SATURATION TRANSISTOR IN SOT26 Features Mechanical Data BV > 60V Case: SOT26 CEO I = 1A high Continuous Collector Current C Case Material: Molded Plastic, Green Molding Compound I = 2A Peak Pulse Current CM UL Flammability Classification Rating 94V-0 R = 100m for a Low Equivalent On-Resistance CE(sat) Moisture Sensitivity: Level 1 per J-STD-020 Low Saturation Voltage V < 250mV 1A CE(sat) Terminals: Finish Matte Tin Plated Leads, Solderable per Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.015 grams (approximate) Qualified to AEC-Q101 Standards for High Reliability SOT26 E1 C1 C1 C2 B2 B1 B1 B2 C2 E2 E1 E2 Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Marking Reel size (inches) Tape width (mm) Quantity per reel DSS4160DS-7 ZN9 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See DSS4160DS Absolute Maximum Ratings Q1 & Q2 Common ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 80 V CBO Collector-Emitter Voltage V 60 V CEO Emitter-Base Voltage V 5 V EBO Continuous Collector Current I 1 A C Peak Pulse Collector Current 2 A I CM Base current 300 mA I B Peak Pulse Base current 1 A I BM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 0.7 (Notes 5 & 9) 5.6 0.9 (Notes 6 & 9) 7.2 W Power Dissipation 1.1 (Notes 6 & 10) P D Linear Derating Factor 8.8 mW/C 1.1 (Notes 7 & 9) 8.8 1.7 (Notes 8 & 9) 13.6 (Notes 5 & 9) 179 (Notes 6 & 9) 139 Thermal Resistance, Junction to Ambient (Notes 6 & 10) 113 R JA C/W (Notes 7 & 9) 113 (Notes 8 & 9) 73 Thermal Resistance, Junction to Lead (Note 11) 96 R JL Operating and Storage Temperature Range -55 to +150 T , T C J STG ESD Ratings (Note 12) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is mounted on 25mm x 25mm 1oz copper. 7. Same as note (5), except the device is mounted on 50mm x 50mm 2oz copper. 8. Same as note (7), except the device is measured at t < 5 seconds. 9. One active die operating with the collector attached to the heatsink. 10. Two active dice running at equal power with heatsink split 50% to each collector. 11. Thermal resistance from junction to solder-point (at the end of the collector lead). 12. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 November 2013 DSS4160DS Diodes Incorporated www.diodes.com Document number DS36556 Rev. 1 2