DXT2011P5Q 100V NPN MEDIUM POWER LOW SATURATION TRANSISTOR Description Mechanical Data Case: PowerDI 5 This bipolar junction transistor (BJT) is designed to meet the stringent requirement of automotive applications Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: FinishMatte Tin Plated Leads. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (Approximate) Features Applications BV > 100V CEO Motor Drive I = 6A High Continuous Collector Current C Voltage Regulator Using Emitter-Follower I = 10A Peak Collector Current CM DC-DC Converter P up to 3.2W D Telecoms 43% Smaller than SOT223 60% Smaller than TO252 Power Management Maximum Height just 1.1mm Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The DXT2011P5Q is suitable for automotive applications requiring specific change control this part is AEC-Q101 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. DXT2011P5Q Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 200 V CBO Collector-Emitter Voltage V 100 V CEO Emitter-Base Voltage V 7 V EBO Continuous Collector Current 6 A IC Peak Pulse Current 10 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3.2 Power Dissipation (Note 6) 1.7 W P D (Note 7) 0.74 (Note 5) 39 Thermal Resistance, Junction to Ambient Air (Note 6) R 75 JA C/W (Note 7) 169 Thermal Resistance, Junction to Leads (Note 8) R 5.6 JL Operating and Storage Temperature Range T , T -55 to +150 C J STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the exposed collector pad on 50mm 50mm 2oz copper that is on a single-sided 1.6mm FR-4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as Note 6, except mounted on 25mm 25mm 1oz copper. 7. Same as Note 6, except mounted on minimum recommended pad (MRP) layout. 8. Thermal resistance from junction to solder-point (on the exposed collector pad). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 November 2019 DXT2011P5Q Diodes Incorporated www.diodes.com Document number: DS39881 Rev. 2 - 2