A Product Line of Diodes Incorporated Green FCX555 150V PNP HIGH VOLTAGE SWITCHING TRANSISTOR IN SOT89 Features Mechanical Data BV > -150V Case: SOT89 CEO BV > -180V Case material: molded plastic. Green molding compound. CEV I = -700mA high Continuous Collector Current UL Flammability Rating 94V-0 C Low saturation voltage V < -300mV -100mA Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) Complementary NPN type: FCX495 Terminals: Finish - Matte Tin Plated Leads, Solderable per Lead-Free Finish RoHS Compliant (Notes 1 & 2) MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.052 grams (Approximate) Qualified to AEC-Q101 Standards for High Reliability SOT89 C E B C C B E Top View Top View Device Symbol Pin Out Ordering Information (Note 4) Product Marking Reel size (inches) Tape width (mm) Quantity per reel FCX555TA 555 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See A Product Line of Diodes Incorporated FCX555 Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Limit Unit Collector-Base Voltage V -180 V CBO Collector-Emitter Voltage V -180 V CEV Collector-Emitter Voltage -150 V VCEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -0.7 A I C Peak Pulse Current -2 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 1 Power Dissipation (Note 6) P 1.5 W D (Note 7) 2.1 (Note 5) 125 Thermal Resistance, Junction to Ambient Air (Note 6) R 83 C/W JA (Note 7) 60 Thermal Resistance, Junction to Lead (Note 8) 10.01 C/W R JL Operating and Storage Temperature Range -65 to +150 C T T J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the exposed collector pad on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is mounted on 25mm x 25mm 1oz copper. 7. Same as note (5), except the device is mounted on 50mm x 50mm 1oz copper. 8. Thermal resistance from junction to solder-point (on the exposed collector pad). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FCX555 2 of 7 June 2013 Diodes Incorporated Datasheet Number: DS33058 Rev. 2 - 2 www.diodes.com