A Product Line of Diodes Incorporated FMMT589 30V PNP MEDIUM POWER HIGH PERFORMANCE TRANSISTOR IN SOT23 Features Mechanical Data BV > -30V Case: SOT23 CEO Case Material: molded plastic, Green molding compound I = -1A Continuous Collector Current C UL Flammability Classification Rating 94V-0 I = -2A Peak Pulse Current CM Moisture Sensitivity: Level 1 per J-STD-020 Low saturation voltage V < -350mV -1A CE(sat) Terminals: Finish Matte Tin Plated Leads, Solderable per R = 250m for a low equivalent on-resistance SAT MIL-STD-202, Method 208 Complementary NPN type: FMMT489 Weight: 0.008 grams (approximate) Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability C E SOT23 C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 4) Product Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT589TA 589 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT589 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -50 V V CBO Collector-Emitter Voltage -30 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current I -1 A C Peak Pulse Current I -2 A CM Base Current -200 mA I B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 5) P 500 mW D Thermal Resistance, Junction to Ambient (Note 5) 250 C/W R JA Thermal Resistance, Junction to Lead (Note 6) 197 R C/W JL Operating and Storage Temperature Range -55 to +150 T T C J, STG ESD Ratings (Note 7) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 15mm x 15mm 1oz copper that is on a single-sided FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Thermal resistance from junction to solder-point (at the end of the collector lead). 7. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 November 2013 FMMT589 Diodes Incorporated www.diodes.com Document number: DS33103 Rev. 7 - 2