A Product Line of Diodes Incorporated FMMT593 100V PNP HIGH VOLTAGE TRANSISTOR IN SOT23 Features Mechanical Data Case: SOT23 BV > -100V CEO I = -1A high Continuous Collector Current Case Material: molded plastic, Green molding compound C I = -2A Peak Pulse Current CM UL Flammability Classification Rating 94V-0 Low Saturation Voltage Moisture Sensitivity: Level 1 per J-STD-020 Excellent h Characteristics up to I = -1A FE C Terminals: Finish Matte Tin Plated Leads, Solderable per Complementary NPN Type: FMMT493 MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Weight 0.008 grams (approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Applications High-side driver Load disconnect switch Motor drive SOT23 E C C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Part Number Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT593TA AEC-Q101 593 7 8 3,000 FMMT593QTA Automotive 593 7 8 3,000 FMMT593TC AEC-Q101 593 13 8 10,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT593 Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -120 V CBO Collector-Emitter Voltage V -100 V CEO Emitter-Base Voltage V -7 V EBO Continuous Collector Current I -1 A C Peak Pulse Current I -2 A CM Continuous Base Current -200 mA I B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 6) P 500 mW D Thermal Resistance, Junction to Ambient (Note 6) 250 C/W R JA Thermal Resistance, Junction to Lead (Note 7) 197 R C/W JL Operating and Storage Temperature Range -55 to +150 T T C J, STG Notes: 6. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions the device is measured when operating in a steady-state condition. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 2 of 7 January 2013 FMMT593 Diodes Incorporated www.diodes.com Document number: DS33106 Rev. 5 - 2