A Product Line of Diodes Incorporated FMMT597 300V PNP HIGH VOLTAGE TRANSISTOR IN SOT23 Features Mechanical Data BV > -300V Case: SOT23 CEO I = -0.2A Continuous Collector Current Case Material: Molded Plastic, Green Molding Compound C I = -1A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM Complementary NPN Type: FMMT497 Moisture Sensitivity: Level 1 per J-STD-020 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Terminals: Finish Matte Tin Plated Leads Solderable per Halogen and Antimony Free. Green Device (Note 3) MIL-STD-202, Method 208 Qualified to AEC-Q101 Standards for High Reliability Weight 0.008 grams (Approximate) SOT23 C E B C B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 4) Part Number Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT597TA AEC-Q101 597 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT597 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -300 V VCBO Collector-Emitter Voltage -300 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -0.2 A I C Peak Pulse Current -1 A I CM Base Current I -200 mA B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 5) P 500 mW D Thermal Resistance, Junction to Ambient (Note 5) R 250 C/W JA Thermal Resistance, Junction to Lead (Note 6) R 197 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 7) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 15mm x 15mm 1oz copper that is on a single-sided FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Thermal resistance from junction to solder-point (at the end of the collector lead). 7. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FMMT597 November 2014 Diodes Incorporated www.diodes.com Document number: DS33108 Rev. 4 - 2