A Product Line of Diodes Incorporated FMMT634 100V NPN DARLINGTON TRANSISTOR IN SOT23 Features Mechanical Data Case: SOT23 BV > 100V CEO I = 900mA high Continuous Collector Current Case Material: Molded Plastic, Green Molding Compound C I = 5A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM 625mW Power dissipation Moisture Sensitivity: Level 1 per J-STD-020 h > 5k up to 2A for high current gain hold up FE Terminals: Finish Matte Tin Plated Leads, Solderable per Complementary PNP Type: FMMT734 MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight 0.008 grams (approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Applications Lamp Relay Solenoid Driving C SOT23 E B C B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT634TA AEC-Q101 634 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT634 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 120 V CBO Collector-Emitter Voltage V 100 V CEO Emitter-Base Voltage V 12 V EBO Continuous Collector Current I 900 mA C Peak Pulse Current 5 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 5) P 625 mW D Power Dissipation (Note 6) P 806 mW D Thermal Resistance, Junction to Ambient (Note 5) R 200 C/W JA Thermal Resistance, Junction to Ambient (Note 6) R 155 C/W JA Thermal Resistance, Junction to Leads (Note 7) R 194 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 2,000 V 2 Electrostatic Discharge - Machine Model ESD MM 200 V B Notes: 5. For a device mounted with the exposed collector pad on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is measured at t 5 sec. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 March 2014 FMMT634 Diodes Incorporated www.diodes.com Document number: DS33115 Rev. 3 - 2