A Product Line of Diodes Incorporated FMMT722 70V PNP SILICON LOW SATURATION TRANSISTOR IN SOT23 Features Mechanical Data BV > -70V Case: SOT23 CEO I = -1.5A Continuous Collector Current Case Material: molded plastic, Green molding compound C I = -3A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM < -220mV -1A Low Saturation Voltage V Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) R = 140m for a low equivalent on-resistance CE(SAT) Terminals: Finish Matte Tin Plated Leads, Solderable per 625mW power dissipation MIL-STD-202, Method 208 h characterised up to -3A for high current gain hold-up FE Weight 0.008 grams (approximate) Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Applications Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) High-side driver Load disconnect switch Motor drive SOT23 E C C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT722TA AEC-Q101 722 7 8 3,000 FMMT722QTA Automotive 722 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT722 Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -70 V CBO Collector-Emitter Voltage V -70 V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -1.5 A I C Peak Pulse Current -3 A I CM Base Current -500 mA I B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 6) P 625 mW D Power Dissipation (Note 7) P 806 mW D Thermal Resistance, Junction to Ambient (Note 6) R 200 C/W JA Thermal Resistance, Junction to Ambient (Note 7) R 155 C/W JA Thermal Resistance, Junction to Leads (Note 8) 194 R C/W JL Operating and Storage Temperature Range -55 to +150 T T C J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions the device is measured when operating in a steady-state condition. 7. Same as note 6, except the device is measured at t 5 sec. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 January 2013 FMMT722 Diodes Incorporated www.diodes.com Document Number: DS33239 Rev. 4 - 2