A Product Line of
Diodes Incorporated
FMMT723
100V PNP LOW SATURATION TRANSISTOR IN SOT23
Features Mechanical Data
BV > -100V Case: SOT23
CEO
I = -1A High Continuous Collector Current
C Case Material: Molded Plastic, Green Molding Compound;
I = -2.5A Peak Pulse Current
CM
UL Flammability Classification Rating 94V-0
Low Saturation Voltage V < -330mV @ -1A
CE(sat)
Moisture Sensitivity: Level 1 per J-STD-020
R = 210m for a Low Equivalent On-Resistance
CE(SAT)
Terminals: Finish Matte Tin Plated Leads, Solderable per
625mW Power Dissipation
MIL-STD-202, Method 208
h Characterized up to -1.5A for High Current Gain Hold-Up
FE
Weight 0.008 grams (Approximate)
Complementary NPN Type: FMMT624
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Applications
Halogen and Antimony Free. Green Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability High-Side Driver
PPAP Capable (Note 4) Load Disconnect Switch
Motor Drive
SOT23
E
C
C
B
B
E
Top View Device Symbol Top View
Pin-Out
Ordering Information (Notes 4 & 5)
Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel
FMMT723TA AEC-Q101 723 7 8 3,000
FMMT723QTA Automotive 723 7 8 3,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See
A Product Line of
Diodes Incorporated
FMMT723
Absolute Maximum Ratings (@T = +25C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Collector-Base Voltage -100 V
V
CBO
Collector-Emitter Voltage -100 V
V
CEO
Emitter-Base Voltage V -7 V
EBO
Continuous Collector Current I -1 A
C
Peak Pulse Current I -2.5 A
CM
Base Current I -500 mA
B
Thermal Characteristics (@T = +25C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Power Dissipation (Note 6) 625 mW
P
D
Power Dissipation (Note 7) 806 mW
P
D
Thermal Resistance, Junction to Ambient (Note 6) 200 C/W
R
JA
Thermal Resistance, Junction to Ambient (Note 7) R 155 C/W
JA
Thermal Resistance, Junction to Leads (Note 8) R 194 C/W
JL
Operating and Storage Temperature Range T T -55 to +150 C
J, STG
ESD Ratings (Note 9)
Characteristic Symbol Value Unit JEDEC Class
3A
Electrostatic Discharge - Human Body Model ESD HBM 4,000 V
C
Electrostatic Discharge - Machine Model ESD MM 400 V
Notes: 6. For a device surface mounted on 25mm x 25mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
7. Same as Note 6, except the device is measured at t 5 sec.
8. Thermal resistance from junction to solder-point (at the end of the collector lead).
9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
2 of 7 December 2014
FMMT723
Diodes Incorporated
www.diodes.com
Document Number: DS33240 Rev. 5- 2