A Product Line of Diodes Incorporated Green FZT1053A 75V NPN MEDIUM POWER HIGH GAIN TRANSISTOR IN SOT223 Features Mechanical Data BV > 75V CEO Case: SOT223 I = 4.5A High Continuous Collector Current Case Material: Molded Plastic, Green Molding Compound. C UL Flammability Classification Rating 94V-0 I = 10A Peak Pulse Current CM Low Saturation Voltage V < 120mV 1A Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) h > 300 I =1A for a High Gain Hold-Up FE C Terminals: Finish Matte Tin Plated Leads. R = 78m at 4.5A for a Low Equivalent On-Resistance Solderable per MIL-STD-202, Method 208 CE(sat) Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability SOT223 Top View Top View Equivalent Circuit Pin Out Ordering Information (Note 4) Part Number Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FZT1053ATA AEC-Q101 FZT1053A 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See A Product Line of Diodes Incorporated FZT1053A Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage 150 V V CBO Collector-Emitter Voltage 75 V V CEO Emitter-Base Voltage V 7.0 V EBO Continuous Collector Current I 4.5 A C Base Current I 500 mA B Peak Pulse Current I 10 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3.0 (Note 6) 2.0 Power Dissipation P W D (Note 7) 1.6 (Note 8) 1.2 (Note 5) 41.7 (Note 6) 62.5 Thermal Resistance, Junction to Ambient R JA (Note 7) 78.1 C/W (Note 8) 104 Thermal Resistance Junction to Lead (Note 9) 10.9 R JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 7) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as Note 5, except the device is mounted on 25mm x 25mm 2oz copper. 7. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper. 8. Same as Note 5, except the device is mounted on minimum recommended pad layout. 9. Thermal resistance from junction to solder-point (at the end of the collector lead). 10. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT1053A May 2015 Diodes Incorporated www.diodes.com Document number: DS33185 Rev. 4 - 2