FZT690B Green 5 45V NPN MEDIUM POWER HIGH GAIN TRANSISTOR IN SOT223 Features Mechanical Data BV > 45V Case: SOT223 CEO BV > 45V Case Material: Molded Plastic, Green Molding Compound CBO I = 3.0A High Continuous Current UL Flammability Rating 94V-0 C hFE > 400 1A and Low Saturation Voltage Moisture Sensitivity: Level 1 per J-STD-020 R = 125m 2A for Low Equivalent On-Resistance Terminals: Finish - Matte Tin Plated Leads CE(SAT) Very Low-Saturation Voltage Solderable per MIL-STD-202, Method 208 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Applications PPAP Capable (Note 4) Darlington Replacement Flash-Gun Convertors and Battery-Powered Circuits Siren Drivers, DC-DC Converters C SOT223 (Type DN) E B C C B E Top View Top View Device Symbol Pin-Out Ordering Information (Notes 4 and 5) Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel FZT690BTA AEC-Q101 FZT690B 7 12 1,000 FZT690BQTA Automotive FZT690B 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See FZT690B 5 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 45 V CBO Collector-Emitter Voltage V 45 V CEO Emitter-Base Voltage V 7 V EBO Continuous Collector Current I 3 A C Peak Pulse Current I 6 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 6) 3.0 (Note 7) 2.0 Power Dissipation W PD (Note 8) 1.6 (Note 9) 1.2 (Note 6) 41.7 (Note 7) 62.5 Thermal Resistance, Junction to Ambient R JA (Note 8) 78.1 C/W (Note 9) 104 Thermal Resistance Junction to Lead (Note 10) R 12.9 JL Operating and Storage Temperature Range -55 to +150 C T T J, STG ESD Ratings (Note 11) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the collector lead on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR-4 PCB device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 6, except the device is mounted on 25mm x 25mm 2oz copper. 8. Same as Note 6, except the device is mounted on 25mm x 25mm 1oz copper. 9. Same as Note 6, except the device is mounted on minimum recommended pad layout. 10. Thermal resistance from junction to solder-point (at the end of the collector lead). 11. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT690B October 2018 Diodes Incorporated www.diodes.com Document number: DS33156 Rev. 6 - 2