FZT78 8B Green 15V PNP MEDIUM POWER HIGH GAIN TRANSISTOR IN SOT223 Features Mechanical Data BV > -15V Case: SOT223 CEO BV > -15V Case Material: Molded Plastic, Green Molding Compound CBO I = -3A High Continuous Current UL Flammability Rating 94V-0 C h > 300 -2A and Low Saturation Voltage Moisture Sensitivity: Level 1 per J-STD-020 FE Extremely Low Equivalent On-Resistance R 93m at -3A Terminals: Finish - Matte Tin Plated Leads CE(sat) Complementary NPN Type: FZT688B Solderable per MIL-STD-202, Method 208 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 0.112 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Applications Flash Gun Convertors Battery Powered Circuits SOT223 C E B C C B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FZT788BTA AEC-Q101 FZT788B 7 12 1,000 FZT788BTC AEC-Q101 FZT788B 13 12 2,500 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT788B Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -15 V CBO Collector-Emitter Voltage -15 V VCEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -3 A I C Peak Pulse Current -8 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3 (Note 6) 2 Power Dissipation W P D (Note 7) 1.6 (Note 8) 1.2 (Note 5) 41.7 (Note 6) 62.5 Thermal Resistance, Junction to Ambient R JA (Note 7) 78.1 C/W (Note 8) 104 Thermal Resistance Junction to Lead (Note 9) 12.9 R JL Operating and Storage Temperature Range -55 to +150 C T T J, STG ESD Ratings (Note 10) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as Note 6, except the device is mounted on 25mm x 25mm 2oz copper. 7. Same as Note 6, except the device is mounted on 25mm x 25mm 1oz copper. 8. Same as Note 6, except the device is mounted on minimum recommended pad layout. 9. Thermal resistance from junction to solder-point (at the end of the collector lead). 10. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FZT788B November 2015 Diodes Incorporated www.diodes.com Document number: DS33167 Rev. 4 - 2